A/T P light on dash

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sounds like yours works right! It is a simple visual reminder that if you put the transmission in Park while the transfer case is in Neutral your truck will roll away. That's it.

All the lights on the dash are explained in the owner's manual too ;)

:cheers:
 
the card in the back of the visor tells, or told you this if you have it still too..:p
 
What do you mean by H and D? If you want others to figure out your problems over the internet, you need to provide as many details as possible.
 
Thanks for the response, I meant when the t case is in High and the transmission in Drive. It's working correctly now here's what happened. Changed all the cluster bulbs to LED's and upon doing so the A/T P light remained on during normal driving circumstances. Funny when I actually put the t case in Neutral and the trans in park it turned off. Odd that's the opposite how it normally functions. Just finished taking the dash apart again and I replaced that 1 bulb back to halogen style and now it's working correctly. The rest of the warning lights and illumination on the cluster work properly via LED. Interesting.
 
Strange indeed.
 
LEDs only work one way, whereas filament bulbs don't care which side is positive so long as there's a voltage difference. My guess is that there's a minor, leaked current with the t-case in high that's enough to light up an LED, but not enough to light up a bulb, and the circuit polarity when in neutral is backwards from what the LED was intended for. Just a guess, though.
 
Back
Top Bottom