a different storage idea...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 21, 2008
Threads
14
Messages
297
Just got done reading the arguement on rear storage vaults, and it got me thinking. A drawer system wouldn't work for me, i carry around a 130lbs dog when exploring the hills, and he is way too tall to fit comfortably on top of one.
1- I have just a few things that i want to keep in the rig all the time, like a few spare parts, and some emergency tools.
2-i would like to mount an extremeair compressor( that i have collecting dust is the garage ) in a desent spot that is out of the way.
3-keep this stuff and anything else away from curious eyes.

I started to think, and wondered if anyone has cut out the floor and built a box under the body where the spare once resided. with access from the top? I thought that the carpet could be framed around the opening to look alright, and then the carpet mat or a tuffy(or something similar) over it. like i said, this would be for stuff that i would not need access to very often. it is dark right now, so cant go look at it. I know the fuel fill lines are right there, so would have to work around them, move them, or something. any thoughts or insights?
 
A great idea and someone already did do this ... I cannot remember the member who made that modification but search for "smugglers hold" and you should see it. It was really cool IMHO. :cheers:
 
just searched " smugglers hold " came up with nothing. definatly would like to see something like this. After some pondering, thought maybe could hold aux battery too. but would have to fit a battery box and vent to the outside. i will have to take measurements when i get time and draw one up.
 
I think that is a cool idia. But remember, you could always do a small box, that was say only 16" wide. That would give plenty of room for a giat dog, and it would not involve hacking out the floor.
 
You could try storage in the quarter panels also. There is a guy at Wagon Gear that makes panels for the 60 that could give you some ideas. I get weary of cutting out my floor (even though the final product looks great) because the facts that I don't have a receiver, I want to cut rear crossmember for clearance, and I have and air tank down there for OBA.
 
Back
Top Bottom