A/C not Kool enough

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hey Curtis, in the #12 post I thought it was clear.

Not to pile on, but it wasn't. Just because you recharged the system (which you made clear) doesn't necessarily mean it fixed the problem (which is the part you made no mention of).

The FSM has a pretty good description of the procedure for viewing the site class to determine if the coolant level is adequate, and other trouble shooting steps if that is not the problem. I don't have mine in front of me, or I'd give you an overview. It'd be worth the $10 to you to download it and have the procedure in hand. It also has a diagram indicating the location of different components of the system.

:beer:
Rookie2
 
Fair enough.

My only point is/was that it wasn't clear to at least two other folks before I jumped in.

Have you re-charged further to clear the sight glass, or are you going to leave it for now?

Curtis
 
There is a pressure gauge on the hose for the refrigerant and it is now leaning into the alert area which is pass the full area. The sight glass seems to fluctuate from clear to fog back and forth. I am blowing much cooler air though.
 
The FSM has a pretty good description of the procedure for viewing the site class to determine if the coolant level is adequate, and other trouble shooting steps if that is not the problem. I don't have mine in front of me, or I'd give you an overview. It'd be worth the $10 to you to download it and have the procedure in hand. It also has a diagram indicating the location of different components of the system.

Were can I download one?
 
Thanks for clarifying. I am sorry but it wasn't clear from your post, which is why three of us asked for results. I assumed it had helped and I am glad to hear it did because I am having a similar issue and I have been debating re-charging the A/C myself or taking it to a shop.
 
There is a pressure gauge on the hose for the refrigerant and it is now leaning into the alert area which is pass the full area. The sight glass seems to fluctuate from clear to fog back and forth. I am blowing much cooler air though.

I probably wouldn't put anymore in then. Off hand, I'm not sure what those symptoms would be indicative of. Hopefully the FSM troubleshoot area has that one covered. The good news is it's blowing cold, but I'd continue to try and track down what is going on.
 
There is a pressure gauge on the hose for the refrigerant and it is now leaning into the alert area which is pass the full area. The sight glass seems to fluctuate from clear to fog back and forth. I am blowing much cooler air though.

Just had a thought on this:

The FSM for my year (91) says to charge at 2000rpm. If yours does as well, and if you were charging at (high) idle, you were getting false high readings.

Curtis
 
There is a pressure gauge on the hose for the refrigerant and it is now leaning into the alert area which is pass the full area. The sight glass seems to fluctuate from clear to fog back and forth. I am blowing much cooler air though.

Either you overfilled the system with refridgerant or the exansion valve is clogged.
 
To be honest, those kits are okay but if you really wanted to do it right and follow the manual you should invest in a manifold guage that can show you the high and the low side. These two items will give you the best idea of what is going on.

Just my nickle.
 
Is this compatible with a Mac computer?

It's great when you can answer your own questions.:D

Yes, the Toyata Tec site is compatible with a Mac computer. I'm running Tiger, 10.4.9 using Safari as my browser.:grinpimp:

Had no problem and was able to download the complete FSM for my 94. Thanks for the link JZenger.
 
Since you converted to 134a, your sight glass is basically useless now. The general rule of thumb is to fill to 80% of max capacity when switching from R12 to 134a. Get some gauges, they will pay for themselves over time.
 
Since you converted to 134a, your sight glass is basically useless now. The general rule of thumb is to fill to 80% of max capacity when switching from R12 to 134a. Get some gauges, they will pay for themselves over time.

It's a '94, so should already have been r134a.

On the other hand, he did say he bought a "retrofit" kit with conversion fittings, etc., so basically who the :censor: knows!

This thread is pretty much a train wreck of miscommunication at this point...
 
So?

Were you charging while at 2k or at idle?

No I wasn't. I was at idle speed with the A/C set on high. What difference will this make. And if it does make a difference can it be amended?

Since you converted to 134a, your sight glass is basically useless now. The general rule of thumb is to fill to 80% of max capacity when switching from R12 to 134a. Get some gauges, they will pay for themselves over time.

It's 85% if you are converting from R12 to 134a but my 94 is already 134a. And if you are converting you should off load all of the R12 first.


Sorry for the delay with answers, geting the boat ready this weekend, detailing.
 
What should the readings be on the gauges when hooked up if operating correctly?
 
The pressure depends on the type of refrigerant and the ambient temperature. A generic chart is shown on http://www.autoacforum.com/aacf/ptchart.cfm.

My 97 FSM specifies 22-36 psi on the low side and 199-228 psi on the high side at 86-95 degrees ambient temp (this is R134a, not R12). These values seem a bit low compared to a lot of industry standard tables I've seen. The measurements are taken with engine at 1,500 rpm, blower on high, and temperature at coldest setting.
 
Last edited:
Back
Top Bottom