97 Center Diff lock stuck

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Maybe not... If the switch is stuck “on” the center diff will stay locked, even if the selector is in high...

Crawl under the truck and just unplug the aforementioned switch... if all goes away your switch is stuck, in a much less common way of “on”...

EDIT: shorted together switch wiring could also cause this
The switch we're talking about is an indicator. It doesn't tell the locker to do anything, it just tells the system that the locker is engaged. If it fails it has no bearing on whether or not the locker engages. I've never heard of one failing 'on', they usually fail 'off' so the locker system doesn't see that the CDL is engaged and therefore won't allow the axle lockers to engage. Wouldn't really affect anything without axle lockers, other than the driver not seeing a light on the dash. I'm very doubtful the switch is the issue, if the CDL isn't disengaging. With some more info we can eliminate some potential causes and maybe fix the problem without throwing unnecessary time and money at it.
 
The switch we're talking about is an indicator. It doesn't tell the locker to do anything, it just tells the system that the locker is engaged. If it fails it has no bearing on whether or not the locker engages. I've never heard of one failing 'on', they usually fail 'off' so the locker system doesn't see that the CDL is engaged and therefore won't allow the axle lockers to engage. Wouldn't really affect anything without axle lockers, other than the driver not seeing a light on the dash. I'm very doubtful the switch is the issue, if the CDL isn't disengaging. With some more info we can eliminate some potential causes and maybe fix the problem without throwing unnecessary time and money at it.

Yes, I believe we are referring to different switches...

I was referring to the “low range” switch. That switch would tell the module to lock the center diff...

If that switch was stuck “on” the center diff would remain locked and the indicator lights would remain on...

I agree, the more info the better. Otherwise its just speculation...
 
It has been fixed.
It turns out PO #1 had a CDL switch in when he sold it to PO #2 (who only bought it for the off-road parts he needed and then sold it to me). PO #2 took out the CDL switch and just left pigtail for it hanging behind the dash, when it's supposed to be plugged into to a special little thing for it to still function when switched from lo to hi.
Long story short, I decided to take the center piece of the dash out and plug the hazard switch into the CDL pigtail. Turned on the truck, pushed in the switch, and voila! Diff is no longer locked.
The only problem now is, I don't have blinkers! :doh::) (i have another hazard switch in the mail)

Thanks to all that chimed in and gave advice.
 
Good deal. There a lot of careless hacks out there who don’t give a crap about the next guy.
 
Back
Top Bottom