80 series suspension press tools. (2 Viewers)

[cjmoon]

Curious, who out there has the loaner set of suspension press tools.

Thanks

 

[chap79]

I used a HF 3/4” drive metric impact set as dies to replace all my bushings. You’re more than welcome to try them.

 

[BILT4ME]

Curious, who out there has the loaner set of suspension press tools.

Thanks

I returned them to you didn't I?

 

[BILT4ME]

I returned them to you didn't I?

Nope. Just checked the garage. I still have them.

I'm the guilty party.

Check your texts.

 

[cjmoon]

I used a HF 3/4” drive metric impact set as dies to replace all my bushings. You’re more than welcome to try them.

I made some tooling on the lathe that grab the lip center themselves. Work pretty well. I have 2 sets floating around I think. Getting one back from Mark.

Thanks.

 

[2fpower]

pretty sure I have the other set. They have been used by many.....

 

[cjmoon]

pretty sure I have the other set. They have been used by many.....

Might have Jack swing by and grab that set. it’s my nicer set. The set Mark dropped off was my original one and they have been used and need some refreshing on the lathe.

 

[2fpower]

Jack picked them up this morning

 

[cjmoon]

Jack picked them up this morning

Worked perfect, between the 2 sets we have a functional set. I’ll clean up and make some more so I have a loaner set and my personal set for all bushings. Some have been lost over the years.

 

[2fpower]

Worked perfect, between the 2 sets we have a functional set. I’ll clean up and make some more so I have a loaner set and my personal set for all bushings. Some have been lost over the years.

How about making sets and selling them?