80 running rough

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The PO401 is a ccommon problem, and there's plenty of info here in how to diagnose and repair. At some point you should go back and install new Toyota plug wires. They can make a noticeable difference on high mileage trucks.'

If it sat that long, it could easily be the tires.

I would have changed them but the stealership had to order them and I didn't want to drop $125 before x-mas on 6 wires. I'll search throught the FAQ's on the PO401.
 
85badger; any update on the vibration? Does it occur only under load, light acceleration, heavy pedal, worse first thing in the morning? Goes away when coasting or still present? Have you had a chance to lube the driveshaft yolks and the U-joints? Check the joints for play? Greased the steering knuckles via the fill/inspection port?
 
85badger; any update on the vibration? Does it occur only under load, light acceleration, heavy pedal, worse first thing in the morning? Goes away when coasting or still present? Have you had a chance to lube the driveshaft yolks and the U-joints? Check the joints for play? Greased the steering knuckles via the fill/inspection port?

Here is the latest..........small vibration still exists (gotta be tires) but had an even bigger vibration yesterday, turns out the PO didn't tighten the lugs nuts on the left rear wheel...:doh:!!! Made a helluva noise for a few miles...pulled over figured out what the prob was, lost one lug nut, Itightened them and was on my way. That could have been a bad deal.
 
Back
Top Bottom