67 OIL FILTER ASSEMBLY MISSING

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 15, 2019
Threads
14
Messages
52
Location
Belmont Nc
my 67 Fj-40 i just got is entirely missing the oil filter and assembly, the oil lines have been caped and equipt removed. Any suggestions?
 
Original engine?
Pics of what you do have would be helpful. Both sides of engine.
 
Yes original engine. This is what i'.m missing

s-l640.webp
 
That is not original equipment. This is:

From this page on SOR:
 
It appears someone fabricated a way to mount a spin on filter. You could possibly use a remote filter assembly and new oil lines to essentially do the same thing.
 
SOR is a little pricey on most things, but they know Land Cruisers. That could certainly do it. Where do they suggest mounting it?
Do you still have the pressure regulator on the side of the block? It's down behind the exhaust manifold on the lower edge of the block. It's where the lines will connect.

Edit: Ouch, that is pretty pricey for what it is. The hardest part of that kit is the correct size fittings to the regulator.

If you're not in a rush, you could do some searching on here to see if someone has solved the problem without the same expense.
 
I bought the SOR remote spin on filter unit for my ‘63. It’s nice. A lot of the cost is in the SS hoses and they’re nice when working around the exhaust. Here’s how I mounted it, stole the design from @Rock40 .
IMG_1962.JPG
 
Back
Top Bottom