60 series CB/Radio Combo Antenna Mounts

Joined
Jul 14, 2015
Messages
250
Location
Brandon, Ms
I think I've linked that splitter a few times now.

J
I'm not sure it's linked in the 60 thread because I skimmed through it to see if I could see what everyone else had done. It would be nice to offer a complete kit (minus the CB/Radio) along with your bracket to save guys some time but I know you're busy.

On another note, related to this, do we have to go to the dealer for a new (stock) antennae grommet or are those N.L.A. as well?
 

TRAIL TAILOR

Enabler
Supporting Vendor
Joined
Jun 21, 2011
Messages
17,288
Location
Redding CA
IIRC, they only come with a complete OEM antenna assy, never offered as an individual part.

J
 
Joined
Apr 14, 2008
Messages
5,368
Location
North of LA California
I am confused on how all the hardware screws together above the fender where the stud sticks out.

Here's what I am looking at buying. Can someone please help me out here and tell me this combo will work?



 
Joined
Aug 10, 2016
Messages
640
Location
La Honda
I have all that in mine, although I didn't really need the splitter for mine, I'm not running a CB I have a Ham hand held radio that I just connect the antenna to.
1898696


IMG_2696.jpg
 
Joined
Aug 10, 2016
Messages
640
Location
La Honda
Are you using the stock mounting position where the power antenna is located? If so you will need to removed that and get this.
 
Joined
Apr 14, 2008
Messages
5,368
Location
North of LA California
Yes, I have Jason's mount and I plan on installing on the fender OEM antenna position. The firestick antenna, is it female or male threads? I am getting dyslexic looking at the assemblies.

The threaded rod sticks out (male), screws into that adapter, then the spring screws onto it, sooo the antenna is which and installs?

That's why I posted the amazon links. I think I have everything but I don't want to waste $15+ getting the correct configuration.

I run a digital 70cm mobile, analog dual band mobile, and then i want the CB installed when I hang out with old people. :D
 
Joined
Apr 14, 2008
Messages
5,368
Location
North of LA California
male firestick threads into female end of spring, the male end of spring threads into that little adapter which is female /female?

So the K-4A stud.... the pictures online don't show it being female / female to plug the threaded rod from jason into the spring male threaded rod.

This is my hang up. What am I missing here?
 
Joined
Aug 10, 2016
Messages
640
Location
La Honda
From the links (first one) you posted that sleeve comes with it. You will have to confirm. No disrespect meant to Jason.
 
Joined
Apr 14, 2008
Messages
5,368
Location
North of LA California
My eyes finally figured it out after looking at the K-4A stud. It comes apart and you ditch the bottomed threaded male section and keep the female to female threaded union.

Thank you everyone for your patience.
 
Top Bottom