6.6 Duramax conversion question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I dont see why the toyota transfer and diffs wouldnt hold up. Here is a link to a local conversion into a Nissan GU patrol, driveline strength is similar to a landcruiser, and this bloke is drag racing it. If you look on the last page another guy is doing wiring looms for the LBZ motor too.

Outer Limits 4x4 Board • View topic - DYNO SHEETS Duramax GU, NEW MOTOR ARRIVED 23/4/10

People are breaking axles with the stock motor and gearing.

The transfer is strong, but not that strong.
 
Are the semi float rear axles really that weak? The patrol in the attached link also has semi float rear axles which hold up pretty well. Some of the comp guys are running 37'' tyres and upto 500hp through them, some maybe more.
 
That Patrol is more like what I envision.

Here we are talking about a Duramax in a TLC and I would be more than happy with an N/A B or H series from the 80's.
 
have you checked the torque output from a duramax? Or looked at the drivline of a 3/4 ton or 1 ton GM or Dodge truck...to compare against the LC?

Don't see a LC driveline lasting behind a duramax or the I-6 cummins..

You are basically talking about putting an engine that has about the highest torque values for its size (that is setup for a 1 ton and 3/4 ton truck...and then swapping in the engine to a small roughly speaking 1/2 ton truck.

I just don't see that as a workable solution. Without some serious mods to the driveline.


Are the semi float rear axles really that weak? The patrol in the attached link also has semi float rear axles which hold up pretty well. Some of the comp guys are running 37'' tyres and upto 500hp through them, some maybe more.
 
Last edited:
The saving grace could be limited traction. No matter how much torque you've got, if you don't have the traction it's pretty hard to break parts.

As soon as you do have traction you'd better be reaching for your wallet.....
 
Back
Top Bottom