4speed transmission shifter plate help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2011
Threads
257
Messages
3,115
Location
Woodstock,GA
I have a 4speed transmission that I'm installing on a 74 fj40 and was wondering if there's supposed to be a detent spring and ball between the shifter plate and the housing. Not sure which type of 4speed transmission i have. Bought the 74 from my dad and he bought the transmission years ago. The shifter plate has already been separated from the housing when I bought the 40. Thanks

1530496493669359723531.webp
 
This probably won’t help much

505E6890-2390-4B74-9D3C-165672681A04.webp


If you don’t get a guru to chime in, you could call Mark’s Offroad in Burbank. He’d know and would probably have it in stock.
 
Thanks. If seen that diagram before and looked like it's under the other plate. I even called someone I know that's a parts manager at Toyota and he thought it was under the other plate as well. I'll get with Mark tomorrow. Thanks for the response.
 
Hi if you look down thru the holes you see notches in shafts the balls have to sit in them. to hold them in gear. when you look at diagram you can see that. cheers Fwed
 
Back
Top Bottom