4H and 4L problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 6, 2004
Threads
82
Messages
1,569
Location
Longmont, CO
Well with all the snow we have received here in Colorado I have had to use my 4 wheel drive. But the only issue is that my 4 wheel drive isn't working. So I am stuck driving my '76 FJ55 around in this crap in rear wheel drive.

My 4H and 4L worked about 2 months ago last time I used it when hunting. But in between then and yesterday it quit. :mad: Yes my hubs are locked and it is fully engaged. Also in between hunting and yesterday I had Grease Fxxxing Monkey change my oil in the engine, tranny, and t-case. Dumbest idea I have ever had. I was in a rush and needed it done now so I paid those assholes to do it. Well they fxxxed the duck and I ended up leaking all my oil out of the oil pan onto my drive way. So they came out and fixed that issue. But now with my 4 wheel drive not working I am wondering if there is something they could have done to fxxx that also?

Thanks,
 
I think you answered your own question. Maybe not the right fluid or not enough maybe. Those 18 year old kids working there probably just grab something off the shelf that looked right. You DID NOT have them flush the tranny or t-case? If they did maybe they fawked something in the process>???
 
But now with my 4 wheel drive not working I am wondering if there is something they could have done to fxxx that also?

Thanks,

No.

It is extremely unlikely that changing the fluids and greasing it could screw up the 2w-4w linkage.

Unlock the hubs, put it in 4w and get under it and turn the front drive shaft to see if it is engaged. If not, try to manually work the actuator rod to get it to engage (forward is 4w). Try beating on it and prying it forward.
If you can move the actuator rod and it still doesn't engage, remove the actuator housing and check the fork for wear and whether it can slide.
 
Is it possible that your hubs are frozen in the unlocked position? The only thing that pushes the drive gear into place is the spring. I think it is possible for them to get frozen in the unlocked position.

Just a thought.
 
Well I have 4 wheel drive now. I unlocked the hubs and crawled underneath. The drive shaft wouldn't spin. WoooHoooo :bounce2: So I figured the hubs weren't locking. So I beat on them with my fist while unlocked then again after I locked them and sure enough they locked up and I now have 4 wheel drive. Granted about 12 hours too late, but hey at least I dont have to to chew out the guys at grease Monkey again.
 
Back
Top Bottom