40 series general tech and classifieds

[ntsaint]

Ditto. And is this a junkyard pull type part that's common?

 

[77TLCFJ40]

My booster was from a 4WD V6 mini truck. It has an aluminum 1.5" to 1.75" spacer behind it. I used my aftermarket '77 master with it, but had to adjust the push rod between the two. I added a proportioning valve when I swapped to read discs. I am very happy with the on and off road stopping ability. The booster does not have a built in check valve, so I used an in-line check valve from a 62.

 

[wngrog]

There are a bunch of Toyota boosters that will bolt right up.

I have used mini truck, 80 series, supra.....it's the same pattern. Usually needs a bit of monkeying around but easy to do.

 

[77TLCFJ40]

There's a '93 80 with a clean looking booster at the PullAPart in Jxn.

 

[wct49]

Chris put a mini truck booster on his I think. Maybe he will shed some light on the subject. Works fine.

mini truck booster from Napa Cadone #535175
80 series non abs master cylinder. Think I had to source that on internets or maybe Marlin.

 

[ntsaint]

Thx guys. I just bought a new MC, so I'd really like to find a mini truck booster.

Sent from my iPhone using IH8MUD

 

[antFJ]

if you get that mini truck booster from napa do you need to get an inline check valve also?

 

[wct49]

if you get that mini truck booster from napa do you need to get an inline check valve also?

dont remember.

 

[ntsaint]

mini truck booster from Napa Cadone #535175
80 series non abs master cylinder. Think I had to source that on internets or maybe Marlin.

Is the OEM master cylinder a bolt on for this booster?

 

[77TLCFJ40]

if you get that mini truck booster from napa do you need to get an inline check valve also?

Definitely!

 

[77TLCFJ40]

Is the OEM master cylinder a bolt on for this booster?

Yes it is.

 

[cbmontgo]

Hey gents,

I am going to be passing through town in a couple of weeks and am looking for a few late model FJ40 parts. If anyone has these, shoot me a PM. Thanks!

Rust-free fenders
Driver's side door
Rear amby doors
FJ62 stock wheel (1)
OEM radio antenna

 

[wngrog]

Hey gents,

I am going to be passing through town in a couple of weeks and am looking for a few late model FJ40 parts. If anyone has these, shoot me a PM. Thanks!

Rust-free fenders
Driver's side door
Rear amby doors
FJ62 stock wheel (1)
OEM radio antenna

I got a line on doors.

May as well go ccot on the fenders.

 

[MEMCruiser]

I got some doors.










The good.









The bad.

I got lots of pics on phone.

One is missing glass as I think you can see in pic.

Anybody know what they are worth?

 

[NOLAKS]

ya'll know this one?

http://northmiss.craigslist.org/cto/3805895537.html

 

[southff4]

ya'll know this one?

http://northmiss.craigslist.org/cto/3805895537.html

Have not seen it. Not bad looking.

 

[jrob]

Hey gents,

I am going to be passing through town in a couple of weeks and am looking for a few late model FJ40 parts. If anyone has these, shoot me a PM. Thanks!

Rust-free fenders
Driver's side door
Rear amby doors
FJ62 stock wheel (1)
OEM radio antenna

I've got fenders, and ambulance doors, amby doors are in GREAT shape, fenders are pretty much rust free with a few minor dings/dents in them off of a 69.

 

[cbmontgo]

I got a line on doors.

May as well go ccot on the fenders.

Yeah, I thought about that. I'll go that route if I can't find some decent ones.

I got some doors.

Anybody know what they are worth?

Those do look pretty good.

I've got fenders, and ambulance doors, amby doors are in GREAT shape, fenders are pretty much rust free with a few minor dings/dents in them off of a 69.

Gonna send you a PM.

 

[Bomar]

JT did the package get delivered yesterday.

 

[fountainhead]

JT did the package get delivered yesterday.

It did: