40, 60, 70, 80, & 200 Series Cup Holders
- Thread starter bhicks
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
This is the option I chose and I have been very happy with them. They are not in the way of the passenger or switches on the dash and it is easier to get the cups in and out of the holder. Back seats roll forward with no problem and it makes it really easy to reach your drinks if you are sleeping in the back of your truck!
Here's version 5.0 of the prototypes. Fitment is perfect. I had to make a few last changes to get fimnent dialed in and a few structural upgrades for durability. It sits nice and snug to the center console with no gaps. Matching that 5 degree slope with a slight bend vertically and horizontally PLUS is tapers at the top was a HUGE PITA, but I finally got it matched. I'm proud of how it turned out. I have now made 3 of these with two more on my printers as I type. I will make a batch of about 10 total over the next few days and get these up on my website by Sunday evening. This can be attached with simply hooking it up top and using the 3 large strips of 3M adhesive OR you can use the screw holes with any 1" coarse thread screw. I made sure this fit on ALL 80 series console. I had to make this in two pieces. The bottom tray is one piece then the double cup/top is the other. I then snap the two parts together and do a 40 minute acetone batch which bonds the two parts into one. There is still remnants of a seam if you look closely but it's not as extreme as the seem you get on injection molding parts. There seems to be two models of center consoles. One with the padded armrest/top and one with a tray on top. The one with the tray on top has a hinge that goes all the way across the rear lid which prevents the "hook" from grabbing up top. I made another design that does not have that hook. It would mount with the adhesive AND screws only. 90%+ of us have the center console with the padded top and the design in the pic will fit that one.
Love the "seconds" dual cup holder I got from you a while back, you have any other "seconds" 
- Thread starter
- #185
Are you asking about my blemished prints? If so, I do have quite a few sitting in a box that need a new home. Shoot me a PM/strat a conversation and let me know what you want. I will dig through the box and see if I have it.Love the "seconds" dual cup holder I got from you a while back, you have any other "seconds"
Sorry if I missed it but are you making anything for the 60 series?
- Thread starter
- #187
Not yet. Need pics of the interior and a loaner console to get me started. The request has been put out there many times but nobody willing to loan me their center console. Just pics of the interior would be a good starting point. I would like to see what space is available and if there are different options for placement.
I can get you all the pics you want, there is a really good place that a double setup would work great. I will get some pics and measurements tomorrow. Heck for that matter I could ship you my console. How long do you think you would need it?
- Thread starter
- #189
Usually takes about 2 weeks to have a perfected prototype ready to ship. I will send you my email.
I'd be glad to ship you mine so you could get it in the works
Any more double cup holders for 80 series available?
- Thread starter
- #193
I keep them in stock most of the time. I have 3 machines that run 24/7 making the front double for the 80 series. I restock the 80 series cup holders every couple days. I had planned to cut way back on the 80 series stuff and only restock once a week but that didn't work out. The demand never slowed down enough for me to be able to do that. Here's the link for US buyers:
80 Series/LX450 Double Cup Holder | BH3D Printing
If your international then go here:
80 Series Double Cup Holder
Payment sent. Thank you!
Installed mine. Double cup holder up front, double cup holder behind center console, and the center piece add-on thinger. All high quality. I screwed in the one on the front, other two have felt pretty solid just installed without screws so far. Great product
I screwed in the one behind my console. It is solid as a rock. I bashed my head into it when I was removing my front seats to fix the seat gears! My head got the worst end of that deal!
I hear ya. Solid stuff
- Thread starter
- #198
Thanks for the kind words guys. Sorry about your head TexasJack. It has been a crazy busy week for orders. this week matched the sells week of the week before Christmas. I was not expecting this massive wave. I guess tax return season is in full swing.
- Thread starter
- #200
Sorry for the delay in restocking some of the 80 series cup holders. Life has gotten stupid busy for me recently with kid #4 on the way. Restocking the website has been less of a priority. Everything should be back in stock and ready to ship again.
