4 High 4 Low No Go

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 14, 2006
Threads
71
Messages
566
Location
C'eh N'eh D'eh
First mcehanical issue that's ever popped up with my truck - I only use 4 Low once in a while but the only reason I noticed anything was when wiping the area around the knob it freely moved forward and back rather than locking into place... I don't recall any unusual knocks or failures so I can't trace when the probelm might have occured. CDL functions normally and a cursory look underneath (ok didn't crawl under yet - frickin cold and wet recently) but plan to lift up in our shop bay this weekend...

Any suggestions for the process of elimination? I've got all the manuals I need to troubleshoot but looking for some helpful hints.

cheers
 
Just to clarify; I don't have a solution but want to make sure I'm undertstanding this correctly. The Hi Lo shifter is stuck in Hi and you can move the shifter up and down efforlessly/bc it is as though it is not connected to anything? as though it is just on a pivot point?
 
I will start with the pivot as PKP80 said .. and check the linkage .. then if all locks fine, see the linkage on your t-case just to see ( I thought less % on this option ) if move free as your lever do ..
 
Yes that's whats happening - obviously 4H is working well as all four wheels turn under power and there are no apparent drive train issues - CDL locks and grabs as it should... but moving the stick to H or L does nothing whatsoever.

I'll check on your suggestions - thaniks.
 
moving the stick to H or L does nothing whatsoever.

The transfer case shift lever is simply a pivot point mounted to the top of the transmission housing. It connects to external linkage that runs back to the transfer case.
 
Back
Top Bottom