3rd annual Southern Cruiser Crawl Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Greg mention the auction on Saturday night.

Debbie and I have two girls with Fragile X. We have a niece and nephew also with Fragile X. We asked the Cottonland BOD if we could have some type of fund raising for Fragile X at the Crawl this year and they gladly backed Debbie and I in this. (Thanks guys)

We were able to get CAR QUEST Auto parts to supply us with a Hobart welder to use in the auction.

It is a Hobart 125. With a retail price of $449.
Car quest also gave us the Mig conversion kit. I believe that it retails for $99.

Here is a link to the welder.

http://www.hobartwelders.com/products/wirefeed/handler125/

If you need a welder this is the best way to get one.

Bring your checkbook and get a welder and the best part is you can write it off on your taxes!

Make the winning contribution to the National Fragile X Foundation and walk away with a great welder.

Debbie, Michaela, Piper and I want to thank Cottonland BOD, Cottonland Cruisers, CAR QUEST and all the participants of the Southern Cruiser Crawl in advance.

See yall on Thursday!

Eric how many more hours do we have??
michaela and piper.webp
 
Motorhome-back in shop getting faulty gas gauge fixed
Trailer-going to shop tomorrow to get wiring short fixed
4Runner-getting new exhaust tomorrow

No groceries, no clothes packed, and most of all no beer purchased yet!!


Will I be there by Thursday night?





YOU'RE DAMN RIGHT!!!
 
dragr1 said:
Motorhome-back in shop getting faulty gas gauge fixed
Trailer-going to shop tomorrow to get wiring short fixed
4Runner-getting new exhaust tomorrow

No groceries, no clothes packed, and most of all no beer purchased yet!

Will I be there by Thursday night?

YOU'RE DAMN RIGHT!!!
Click to expand...

When you get there bud, just head over to where the other RV's are.
Roger & I are scoping out level ground Thursday morning for everyone bringin RV's.........last year they were on a slight hill:crybaby:

See ya bud....
 
wct49 said:
Eric how many more hours do we have??
Click to expand...

57 til I leave!

wct49 said:
We asked the Cottonland BOD if we could have some type of fund raising for Fragile X at the Crawl this year and they gladly backed Debbie and I in this. (Thanks guys)
Click to expand...

Cottonland has the best BOD I've ever seen! I love their BOD!
 
Clutchee said:
When you get there bud, just head over to where the other RV's are.
Roger & I are scoping out level ground Thursday morning for everyone bringin RV's.........last year they were on a slight hill:crybaby:

See ya bud....
Click to expand...


I was thinking about when entering the camping area-the woods to the left-there are always a couple of RV's there. Plus I can park there and the generator will be facing the woods.
 
badass said:
I don't need the rim but i probably won't have time to dismantle mine until after the crawl either, if you have an mtr, that would be great as i probably will need a spare, doesn't have to have much tread. Thanks and let me know asap.
Click to expand...

Dont have any MTR's but have 2 Procomp AT at 30% and 1 Generic AT at 70% all 3 are mounted and ready to use. I dont mind throwing 1 or 2 on the trailer so you will at least have a spare (even if you dont want to buy one.):) :beer:

I'm planning on leaving on Thursday night.
 
Hey does anyone run course spline birfs........want some spares?

Curious I have had these for 1yr from a 40 I parted out......

I can bring to the crawl in exchange for 15 raffle tickets.

Let me know......AGAIN THESE ARE COURSE SPLINE they will fit a EARLY model 40!
 
Last edited:
looks like we need the swap meet THURSDAY night and not Sunday morning:flipoff2:


edit: Oh yeah, I got 46 more hours!
 
THIS IS CRUISER CRAWL LAUNCH CONTROL

47 HOURS AND COUNTING!!!!!!
 
zman2day said:
Dont have any MTR's but have 2 Procomp AT at 30% and 1 Generic AT at 70% all 3 are mounted and ready to use. I dont mind throwing 1 or 2 on the trailer so you will at least have a spare (even if you dont want to buy one.):) :beer:

I'm planning on leaving on Thursday night.
Click to expand...

Just want to let you know that i got my tire plugged and the other one that had split the sidewall patched, however, if you have the room it would be nice if you brought a spare cause my spare can't be used offroad, it's only for gettin me home and that's under 30mph. I'd appreciate it if you brought it just in case. Thanks, alot.
 
36 HOURS!!!!!!!!!
till the Clampett's leave!
 
4Runner has a new muffler, but I think it still has an annoying exhaust leak, trailer is rewired, hoperfully the brake controller and gas gauge work on the motorhome now-picking it up Thursday morning and will be leaving Auburn hopefully between 1 and 2 Thursday afternoon and arriving hopefully at Gray Rock no later than 5pm Thursday.
 
Shirts are ready and I am chompin' at the bit to load the truck. I'll be worthless at work tomorrow! I never am so that won't be a stretch. (said it before Tony had a chance too).

Readyyyyy Break!
 
Bodean said:
Shirts are ready and I am chompin' at the bit to load the truck. I'll be worthless at work tomorrow! I never am so that won't be a stretch. (said it before Tony had a chance too).

Readyyyyy Break!
Click to expand...

I'm so ready for a break from work-March through October is just crazy at work for me-I'll be worthless tomorrow too though!

I just realized that the last time that I wheeled my own vehicle was at this ride last year.
 
dragr1 said:
4Runner has a new muffler, but I think it still has an annoying exhaust leak, trailer is rewired, hoperfully the brake controller and gas gauge work on the motorhome now-picking it up Thursday morning and will be leaving Auburn hopefully between 1 and 2 Thursday afternoon and arriving hopefully at Gray Rock no later than 5pm Thursday.
Click to expand...

finally got tacozilla running again tonight,but it still sounds like crap. it's now midnight and i'm going to bed!! i'll have to finish the belts and radiator tomorrow afternoon and try to get it by a repair shop with the hopes they'll be able to locate the :censor: grimlin that's causing the misfires!! later!:beer::cheers::beer:


Ernie
 
Cruiser Crawl launch control...
25 hours & counting:bounce::bounce2:
 
Going to eat lunch then make sales calls heading north on 65. Spending the night at a buddies house near bham. Will be there noon thurs. See you girls at the crawl.

Harrington, OUT!
 
You must log in or register to reply here.

Share this page

Back
Top Bottom