2f head gasket question.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 8, 2019
Threads
2
Messages
14
Location
eastern wa
So I have recently spotted oil leak by where the head meets the block on the passenger side. The valve cover seems to be dry and there's no loss of coolant or smoke. Fj never gets hotter than 185f. I'm assuming head gasket but never head one blow without loss of coolant or overheating.
Anyone had anything similar?
 
Some good pics would help and may also encourage some of the great detectives here to chime in.

Are you certain it’s between the head and the block? When pinpointing a leak I like to super clean the area well and get it bone dry then watch closely for the exact spot of the origin of the leak.
 
It's on top of the square plate that's right under head. I'm thinking it's that gasket. But my buddy says its hg

IMG_20190708_182310505_HDR.webp
 
my not highly technically informed answer would be it is the side cover gasket. it is cork and after 40 years is rock hard and needs to be replaced.
fairly straight forward, hardest part is removing all the old material.
 
^^^ I agree. Nice pic btw
You could try to tighten the side cover bolts just a tad but be sure to not over tighten. The side cover is thin and easily distorted.
Most likely it needs to come off.
 
Back
Top Bottom