2F Cold Start Squeal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 12, 2017
Threads
23
Messages
70
Location
Cartersville, GA
This squeal occurs at startup when cold. This is a 1983 2F block with a Toyota dizzy from City Racer equipped with pertronix lobe sensor ignition. The noise seems to be coming from the distributor area, so it has me thinking a bearing in the distributor is shot. Have any of you heard this same sound or recognize it as something more serious? Here's the link to the video:



Any input would be appreciated.
 
Loosen up your fanbelt(s), see if the noise goes away.
What year distributor? I can't see well enough in the video to tell. Early dizzies didn't have bearings, just bushings. But they did have a handy place to add oil to the shaft.
 
So I've loosened and tightened the belt, not much change. Sprayed some belt dressing on there and seemed to temporarily stop the problem. I know I have the correct alternator, mount, pulley and belt, but one edge of the belt seems to be wearing a bit more, and maybe just a little bit off alignment. Pretty sure that's my noise. Could I be missing a washer somewhere on the alternator mount?
 
If belt dressing quieted it down, take the belts off completely and start up when cold. If its quiet, add one belt at a time and start up. Set tension so you can rotate the belt so that the top of the belt can go 90 degrees, not much more. Usually that is good to go and will break in and not need readjusting. Fresh oem belts usually resolve as the existing belts usually are either worn or the wrong size.
 
Could I be missing a washer somewhere on the alternator mount?

Sure, that could be it. Could be the wrong belt too...

Edit: too thin a belt won't fit the pulley correctly...
 
Last edited:
Sure, that could be it. Could be the wrong belt too...

Edit: too thin a belt won't fit the pulley correctly...
Here is the belt, which I’m pretty sure is correct, but the manual indicates it should to sticking out the top a bit?

DA6E4078-7795-4411-9BCD-1BD3D2645A53.webp
 
Back
Top Bottom