200 Series Accessory Switches?

[rvaupel23]

Searched the site and couldn't find anything. Who knows how/where to get light and/or other accessory switches for the 200 Series (2013 in my case) that are or at least look OEM?

The left bank is full but I could see using the empty right bank to control a winch, lockers, trail lights, etc. but I'm also interested in what other ideas / uses people have incorporated into their 200 Series. (Pics would be great.)

Thanks.

 

[bjowett]

For lights, I'll probably use Toyota FJ Cruiser aux. light switches. Part numbers switch: PT297-35070-AS and harness: PT297-35070-SH (not required). They should fit, but I'll verify.

 

[Delancy]

Use FJC Rear Locker switch for both front and rear locker, with a careful stroke of a Sharpie.

They all ILL amber.

 

[4x4tripping]

I`m also looking for new switches

I need one for the 2nd Fuelpump between main and subtank and a 2nd for my sunvisor monitors.

I hope someone has some additional links

 

[elkaholic]

I have not popped any of the blanks out to measure them, but they appear to be a standard size opening for switches such as the Carling Contura switches (the same switches that ARB uses for compressors / lockers). If this is the case there are several companies in the US that sell them. Here is one of them.

 

[Delancy]

You can't find a better guy to work with than Jim at OTRATTWs.

The new series switches can be ordered with corresponding coloration for back lit and on, too.

 

[Ozi200Cruzer]

Hi,
I have these type of rocker switches in my dash. You can get them from ebay - just search for 12volt rocker switch and up they come.

Hope this helps.

 

[crazy1323]

I really want to replace the lower dash on my LX with The LC one so I can fit more switches cleanly. Does anyone know if they ever offered the 200 with the dark gray interior like the LX?

 

[Billfish]

try this Ebay link for 'Air On Board' all factory fitting switches including lights, lockers, winches, spots, compressors..the list goes on. All fit perfectly.

http://stores.ebay.com/aironboard/Cruiser-200-series-/_i.html?_fsub=843068619

 

[elkaholic]

Thanks Billfish!

For those of us in the US, their store is found here (slightly different url) ... http://stores.ebay.com.au/aironboard/Cruiser-200-series-/_i.html?_fsub=843068619

 

[Desert Nomad]

Drilled through the blank covers and installed these on. One is for the roof and bumper spot lights, the other is for the rear worklight.