1fzfe knock

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 5, 2015
Threads
2
Messages
7
Location
Australia
Hi all!
First time poster but long time reader, so much useful information here.

I've got 95 Australian 80 series with the 1fzfe, when I start it I get a knock in the engine, but once the engine gets to temp (not water temp but oil temp), the knock goes or at times very faint.
I've narrowed it down to number 4 cylinder, I've used my stethoscope but 100% locate the sound. Has perfect oil pressure, recent oil change (made no difference), going to check the valve clearances this weekend but I find it odd that the noise goes when engine is a temp, would have thought if it was valves, piston slap or rod knock that the noise would remain no matter the temp..

I checked the ecu faults and it's thrown 24 and 41, could this affect anything? The engine drives beautifully and has no leaks, just a frustrating noise!

Anyone else had an issue like this?

Thanks in advance, and love the site!
 
Loose spark plug?
 
Piston slap, will quite down after warms up need rebuild at some point
 
You might want to try (carefully) running some seafoam through the intake. It probably won't help much but its cheap and easy.
 
This video has a good example of rod knock and what it sounds like:



Not a landcruiser, but the sound would be similar. Valve based noises are going to be slower (1/2 speed) and sound more like tapping than that. If it is more in the tapping realm, it could be chain/tensioner issue, or badly adjusted valves.
 
Yeah it's definitely not that, thank God lol, I'll pull the plugs out this weekend and see if that'll inform me of something.. It's not bad just irritating and the fact I can't locate the exact spot is more irritating!

Thanks all
 
Back
Top Bottom