1FZ in Forklifts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 31, 2009
Threads
10
Messages
43
I found this brochure the other day when searching on google:

Link

If you look on page 11 you will see that some of the Toyota forklifts are powered by 1FZ engines. I don't know if anybody really cares but I thought it was interesting none the less. Anybody have any ideas on what cool engine parts we might be interested in from a forklift that our LCs don't have?

Jonathan
 
It'd be interesting to see the specs on the 1FZ forklift engines. I wonder if they're even still manufactured....


Here's what's listed (against my '97 FSM).

1FZ-E:

Displacement: 4476
Torque (Nm/RPM): 294/1200 RPM


1FZ-FE:

Displacement: 4477
Torque (Nm/RPM): 373/3200


Not a lot of info there.
 
Last edited:
A forklift tech buddy told me that they have iron heads, but even if true, they probably don't have the proper holes, etc to work with EFI?
 
The "E" suffix in 1FZ-FE means EFI. :p ;)

That's pretty cool, I did not know 1FZs were used in forklifts.
 
If I am correct I think that toyota developed the 80 series motors for industrial applications as well.
In some form or another I think that these types of motors have been manufactured by toyota for along time for industrial applications.
Maybe that is why they seem to keep on running.
 
So who's going to be the first to transplant an industrial version into an 80?
 
yes id like to order a diesel replacement engine for my Toyota forklift..ya forklift:hhmm:
 
Apparently Toyota used an iron head on all carb versions of the 1FZ, which were sold in the middle east and South America on a number of 80 series and 70 series rigs.

The only part that would interest me from a 1FZ forklift engine would be the alternator and bracketry. Apparently Toyota installed heavier duty and high amp alternators for it's forklifts than it did for it's trucks. Maybe because of electric motors running the hydraulics of the forks, etc. Plus the alternators are probably geared to put out a good amount of amps at low rpms.

I already have the photoman bracket and Sequia alternator which has worked great for me, but whatever they use for the forklifts might be a neat and easily sourced bolt on modification for others.
 
I would think the alternators would put out less amps, there is normally next to nothing for electrical on lift trucks.
The hydrolic pumps are normally driven off the engine itself.
 
This look familiar? :hhmm:

/me edits

Found a better pic:
Toyota 5FG / 5FD Engine Powered Forklift Brochure


And some more references:

http://www.toyotamaterialhandling.com.au/downloadfile.aspx?fileid=6220
http://www.toyotamaterialhandling.com.au/downloadfile.aspx?fileid=6221
https://forum.ih8mud.com/80-series-tech/246137-1fz-e-forklift-engines.html
http://www.crown-motors.com/eng/toyota/detail.aspx?id=285#
http://www.toyota-forklifts.nl/Site.../PDF files/specsheet 5FGD+2007389+english.pdf
1fz-forklift.webp
 
Last edited:
head looks to be aluminum..... i will take one please.....in diesel;)

The diesel is a different size. I suspect it's larger and requires a bigger fork lift body....
 
2Fs were common in forklifts, why not 1Zs. Supposedly Paclift had some good deals on rebuild parts for 2Fs - might be a soucre for 1FZ kits, if you ever manage to wear one out.
 
2Fs were common in forklifts, why not 1Zs. Supposedly Paclift had some good deals on rebuild parts for 2Fs - might be a soucre for 1FZ kits, if you ever manage to wear one out.

I was more thinking the parts to convert it to run LPG. :hhmm:
 
The starter I bought for the forklift version turned out to be the smallest version. There is a vendor on e-bay that sells parts.
 
Back
Top Bottom