1992 22RE wiring harness source

[meatloaf]

Son's truck needs a new harness since the knock sensor connector snapped off the wire. I've read that this year model is non repairable.

I talked to Jim's in co. He sells them for $100 but did not have one.

Are there any other sources for these?

Thanks in advance,
ML

 

[KLF]

Engine harness? Check eBay. I just sold one a couple of months ago.

 

[Mudder]

You can also splice on a connector and wires. What I did was used the old connector and soldered a wire to it then carefully cut a coax cable and put it around it with heat shrink as the shielding wire. One of the V6 plugs also works for the re knock sensor

 

[snobdds]

I have a spare harness for a 22re series engine, but I don't know what year it's for. Are you a gambler?

 

[Toast]

Engine harness? Check eBay. I just sold one a couple of months ago.

Yea you did!

 

[meatloaf]

Engine harness? Check eBay. I just sold one a couple of months ago.

Nothing on ebay...

I have a spare harness for a 22re series engine, but I don't know what year it's for. Are you a gambler?

depending on the cost of the gamble! do you have pictures of the ecm connectors?

You can also splice on a connector and wires. What I did was used the old connector and soldered a wire to it then carefully cut a coax cable and put it around it with heat shrink as the shielding wire. One of the V6 plugs also works for the re knock sensor

I had read somewhere that the 22re knock sensor wire was not repairable, and that only the V6 is

 

[Mudder]

What they mean is that the re is a one wire system. But if it brok you can splice and solder. I had to do it to make my wire longer for my EFI swap.

 

[meatloaf]

Thanks mudder, I will have to try it then