Hi everybody,
Long-time lurker, first-time poster. Thought I'd give a quick intro to my rig.
She's a 1977 BJ40 that I imported to the states from Japan back in June.
Here she is rolling off the truck the day I took delivery:
Let's start with the good:
- the B engine was in great shape (odometer read about 13,000 kms; I didn't know it at the time but the odometer only has 5 digits
)
- the chassis was in great shape
- price (I won her on a Japanese auction site for about 600,000 yen (about $5k USD). It cost about $2k for shipping, import fees, customs, etc. So all-in to my door was a little under $8k.)
Ok now for the bad:
- RUST; the front bib has tons of rust on the lower portion and lots of rust in the usual spots (door jams, rain gutters, etc)
- she also was running extremely rich (high idle, black smoke) which I'll get into in a bit
- clutch master cylinder was leaking
- tires looked like they were about to blow
- brakes needed to be adjusted (pulled to left under heavy braking)
Bottom line, she needed a bunch of TLC but with the price I paid, not too bad. I should mention that this is my first land cruiser. I should also mention this is the first diesel car I've owned so I really had no idea what I was in for
Work I've done so far:
- Replaced the vacuum diaphragm. Remember that high idle and black smoke issue? Well, it was caused by a leak in the vacuum system. After searching these forums I learned that the B engine has a leather diaphragm that can deteriorate over time if not properly oiled. Shout out to all the posters whom I've learned so much from but especially Lostmarbles and Rudi for their wealth of knowledge
- front disc brake conversion
- new clutch master cylinder
- new tires
- oil change
- new fuel filter
- other random maintenance stuff
Things to do:
- I want to eventually run 33s so looking at lift kits right now
- My gf hates the smell of diesel so I'm working on redirecting the blow by back into the intake
- title and registration; still waiting on CA to issue them to me but I should be getting them soon; let me know if anyone else is thinking about importing one of these and I can give you some pointers
Now for some fun. I just finished an almost 3,000 mile trip from Los Angeles to Denver and back, with a couple stops in Flagstaff, Moab, Salt Lake City, and Yosemite. I met a board member randomly in a Safeway parking lot in Flagstaff and had a great chat about our rigs. He said his username was Flag40 or something. Anyways, Lance if you're reading this, it was great meeting you!
Had a couple issues on the trip (dead batteries from a loose alternator and a loose fuel line) but made it back safe and sound. Here are some photos from my trip:
Dispersed camping outside Flagstaff:
Valley of the Gods:
Gemini Bridges Trail:
Camping in Yosemite:
I'm based in Los Angeles, so if anyone's in Socal and needs an extra wrench, wants to go on some trails runs, or just wants to grab a beer sometime, let me know!
Long-time lurker, first-time poster. Thought I'd give a quick intro to my rig.
She's a 1977 BJ40 that I imported to the states from Japan back in June.
Here she is rolling off the truck the day I took delivery:
Let's start with the good:
- the B engine was in great shape (odometer read about 13,000 kms; I didn't know it at the time but the odometer only has 5 digits
- the chassis was in great shape
- price (I won her on a Japanese auction site for about 600,000 yen (about $5k USD). It cost about $2k for shipping, import fees, customs, etc. So all-in to my door was a little under $8k.)
Ok now for the bad:
- RUST; the front bib has tons of rust on the lower portion and lots of rust in the usual spots (door jams, rain gutters, etc)
- she also was running extremely rich (high idle, black smoke) which I'll get into in a bit
- clutch master cylinder was leaking
- tires looked like they were about to blow
- brakes needed to be adjusted (pulled to left under heavy braking)
Bottom line, she needed a bunch of TLC but with the price I paid, not too bad. I should mention that this is my first land cruiser. I should also mention this is the first diesel car I've owned so I really had no idea what I was in for
Work I've done so far:
- Replaced the vacuum diaphragm. Remember that high idle and black smoke issue? Well, it was caused by a leak in the vacuum system. After searching these forums I learned that the B engine has a leather diaphragm that can deteriorate over time if not properly oiled. Shout out to all the posters whom I've learned so much from but especially Lostmarbles and Rudi for their wealth of knowledge
- front disc brake conversion
- new clutch master cylinder
- new tires
- oil change
- new fuel filter
- other random maintenance stuff
Things to do:
- I want to eventually run 33s so looking at lift kits right now
- My gf hates the smell of diesel so I'm working on redirecting the blow by back into the intake
- title and registration; still waiting on CA to issue them to me but I should be getting them soon; let me know if anyone else is thinking about importing one of these and I can give you some pointers
Now for some fun. I just finished an almost 3,000 mile trip from Los Angeles to Denver and back, with a couple stops in Flagstaff, Moab, Salt Lake City, and Yosemite. I met a board member randomly in a Safeway parking lot in Flagstaff and had a great chat about our rigs. He said his username was Flag40 or something. Anyways, Lance if you're reading this, it was great meeting you!
Had a couple issues on the trip (dead batteries from a loose alternator and a loose fuel line) but made it back safe and sound. Here are some photos from my trip:
Dispersed camping outside Flagstaff:
Valley of the Gods:
Gemini Bridges Trail:
Camping in Yosemite:
I'm based in Los Angeles, so if anyone's in Socal and needs an extra wrench, wants to go on some trails runs, or just wants to grab a beer sometime, let me know!