1974 FJ40 in Central CA

[bogus one]

Hey, Dan

do you have the brake hard lines for the frame?

 

[D'Animal]

I have some frame brae lines. I will have to check to se if they are for a FJ 40.

 

[bogus one]

Thanks, I need later model stuff, as I've put '78 axles on the boy's rig

 

[D'Animal]

I still have this.

I connected it to 12v and both the high speed and low speed work.

The wiper link wire needs replaced. Mark has them for $20 under part # 169-02 on his site.

Catalogue Page 28

$125 plus shipping will get you both the motor and the link pivot, the spacers, 4 mounting bolts and the wiper arms. Basically everything but the wire going down the windshield.









Let me know.

 

[Bear80]

Do you still have the front upper shock mounts?

 

[D'Animal]

I will see how much of the frame is left and if they are still on there.

Most people use the F-250 upper shock mounts.

 

[mattolewis]

Is the str tie rod still available?

 

[D'Animal]

Should still have it.

 

[Blacksunshyne]

I am trying to locate a flasher relay for my '70. Do you have a working one you might want to part with?

 

[D'Animal]

Here are the pics.

$125 plus shipping.

 

[bogus one]

How 'bout the rear frame mount brake line and splitters. any luck?

 

[D'Animal]

The splitter is on the axle. I think I have the front one from the frame.


The brake line tab is the metal one with one bolt in the center holding two lines on?.

 

[bogus one]

The splitter is on the axle. I think I have the front one from the frame.


The brake line tab is the metal one with one bolt in the center holding two lines on?.

I need the front frame mount splitter and the actual hard line to the rear

 

[copasspupil]

Do you still have the clutch pedal assembly and turn signal diretionals for the front and rear?

 

[D'Animal]

Yes on the clutch/brake pedal assy.

Do you need the turn signal switch on the column?

 

[copasspupil]

No looking for the front and rear turn assemblies

 

[jmq4]

D'an-

Would you sell just the windshield wiper motor and housing? The D/S gears/box and cable I have are fine on the D/S.

Also do you have rear view mirror, visors, ash tray and glove box cover?

Thanks

joe

 

[D'Animal]

Glove Box Door


The blue tape is holding on the envelope with the mounting screws and hardware.

 

[D'Animal]

AshTray could use an SOS pad to clean off the surface rust.

 

[jmq4]

D'an:

sent you a PM about the windshield wiper setup.

joe