100 Series General Tech and Classifieds

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

So, I finally talked myself out of downsizing my tires

As little as I drive this truck these are just too good to ditch.

So I fixed my stance with some Slee Spidertrax spacers.

Looks much better. Like me some wide tars

Before

View attachment 1136341

After

View attachment 1136343

Spidertrax quality is second to none

View attachment 1136345

I even used this thing....

View attachment 1136348

Pimp

View attachment 1136351

Very pimp. Looks awesome. Any impact on ride?
 
So, I finally talked myself out of downsizing my tires

As little as I drive this truck these are just too good to ditch.

So I fixed my stance with some Slee Spidertrax spacers.

Looks much better. Like me some wide tars

Before

View attachment 1136341

After

View attachment 1136343

Spidertrax quality is second to none

View attachment 1136345

I even used this thing....

View attachment 1136348

Pimp

View attachment 1136351
Any clearance issues? Any shake going down the road? The only spacers I've tried were non-hubcentric, and the truck shook like a mother....
 
So I got a new toy to haul around with my LX and I noticed something. I know you need to turn off the Suspension during towing but for some reason it automatically turns back on after 35 mph... Any ideas?!?! Oh here is my new toy..
View attachment 1136368


Nice toy! Unless you have a Slee override switch you can't turn it off.

It won't hurt a thing to tow with AHC on.
 
Any clearance issues? Any shake going down the road? The only spacers I've tried were non-hubcentric, and the truck shook like a mother....

No. This truck came with spacers and I did not know how to use the long studs to center the wheel so I ditched them.

These came after @ntsaint gave me the thumbs up.
 
So, I finally talked myself out of downsizing my tires

As little as I drive this truck these are just too good to ditch.

So I fixed my stance with some Slee Spidertrax spacers.

Looks much better. Like me some wide tars

Before

View attachment 1136341

After

View attachment 1136343

Spidertrax quality is second to none

View attachment 1136345

I even used this thing....

View attachment 1136348

Pimp

View attachment 1136351


Don't forget to re-tighten those a few times. Had them on my 62 and they loosened up 3-4 times before they stop.
 
I actually think these new ones stay seated better. I used to just crank on them but this time I used the locktite and a M f-in torque wrench!

I need an alignment. I think I'll take it down. Rotate and balance and re check them Friday with Toll
 
Yeah, I saw that last night... It's a diesel, but still mind-staggering numbers... I've seen several 300+ and one 400+ on that thread.

Also, I picked up my rig from Tolleson today and I couldn't be happier with the lift. I'll post up some poser shots when I get a chance.
 
thinking about a change in wheel color....I know it will not be a fan here but need a change and have an extra set of wheels.

bronzeburst.webp
 
Back
Top Bottom