Ordered a set of new 48190-60011 camber bolts for my 98' Lx470 which look exactly the same as OEM except the grooves for the camber nuts are oriented horizontally. 😢
Was hoping to refuse the original camber nuts... Does anyone know the part number to replace these for OEM horizontal grooved...
Bushings on my 08 GX470 (178K) are dry and cracking. Looking into options to replace the bushings or the entire lower control arm and just start fresh.
Trying not to break the bank on the replacement. Any suggestions for brands to look at and/or tips for the replacement?
As title states. These are new, and I paid $295 +shipping
Not adjustable-standard length. These have TALCB-21K21 stamped into them.
You can have these for $250 + shipping.
I have a set of JBA off-road upper control arms. They are bRand new. Never installed. I am located in Atlanta will ship on your dime
theee were bought for my sequoia that I sold :( regret it everyday. So dumb. Another story. For another day
asking 500 plus shipping
Hello,
I'm looking for both rear lower control arms and the lateral link from a 100 series. Bushing condition doesn't matter. Links must be straight. Located in Monterey, CA. Will drive a bit to get them.
Thanks.
I put these on my 1999 Lexus LX470 in February 2023 and decided to go another route.
The uniballs in the arms need to be replaced and I went ahead and bought the next user some fresh bushings to install while you're in there.
I'd prefer not to break up the set - here is a pricing breakdown...
Does anyone have a cheaper source of rear lower control arms? For new parts, ebay is the lowest at around 160 per side shipped. I've also checked Partsouq and rock auto. I'd be fine with remanufactured, but couldn't find that option.
Thanks
Full set of control arms for an 80 series. I bought an extra set to install new bushings so I didn't have any downtime. Includes fronts with blue caster bushings for 2.5 lift, 2 rear upper, 2 rear lower, panhard rear and front. The arms all have oem older bushings.
Also selling 2 front fox...
For sale is long list of parts that I have removed from the GX and others that I purchased but didn't end up needing. I will have other threads for other parts (wheels/tires, etc.) in the appropriate sections.
Rear Axle - Stock rear axle - Housing only - free
rear axle shafts - free
Rear upper...
I would like to read others input on what brand of REAR control arms they used, why, experiences, satisfaction, etc.
I see different brands. Most seem to have Johnny Joints. Are these reliable? Or do they squeak if not constantly lubed?
I tried searching but didn’t find much.
Thank...
Rear upper and lower control arms, panhard bar and all hardware as I recently replaced mine. These are pretty beat, but could make a good core to blast and press new bushings into, run temporarily while new bushings are pressed into your existing arms, etc. I'd prefer not to ship but will...
Selling OEM upper control arms that I bought new a few years ago. I replaced with aftermarket control arms to accommodate my lift. Many many miles left on these.
$60 USD plus shipping for the pair
Bought these OEM control arms to replace on my 100 but I sold the truck before I had a chance to put them on.
$200 OBO + shipping from Montana. I'm moving in a couple weeks so would love to get them gone before then.
Thanks