40th badge painted over?!?!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2005
Threads
52
Messages
424
Location
Arroyo Grande, CA
*EDIT - Well bought the truck today 3/8/07! Don't care about the emblem or sticker, it's clean except for that and the roofs clear coat starting to peel! Check out post #33 for the purchase details. Thanks guys.
"Oh, what a feeling!"

attachment.php






Original post-
Well my dream is almost a reality. Thursday I'll be picking up a Diff Locked ;) 97 FJ80 emerald green 40th, orig owner 122K never any problems and only services were fluid changes, brakes and normal maintanence. Never a head gasket problem and doesn't 'appear' to have one now.

Only issue is it was in an accident in 1999 he, (ER Doctor), had a slow slide (20-25mph he stated) on black ice and slide into a dirt embankment and damaged "most" of the lower drivers side of the vehicle, no glass was broken, (haven't seen the paperwork of work done yet). He said they had to repaint alot of the car. Well I noticed, (and the car was dirty from a trip to Tahoe the day before), that it appears that they painted right over the 40th emblem and sticker!!!

I realize the emblems were not available from the dealer some time after they were introduced if at all from I think an old post by CDan. So on one hand Im glad they didn't chuck them but had they never heard of masking tape!

So here's my questions...

I can tell the "40" is painted over, you can see drips!!!! But the sticker is very hard to read so that must be painted slighty over too?

I'm thinking if I can pop the "40" off, (after carefully cuting around the painted over numbers), and cleaning them with something, some solvent, to get the paint off. Any suggestions? Are they supposed to be black chrome too, or plastic?

Then maybe carefully fine sand the "th anniversary..." sticker with like 2500 grit sandpaper and buff out?

Thanks guys,
Looking forward to years of fun on the board and the trails,
Jeff
40th.webp
 
Last edited:
just saves you from putting the 1st scratches on it when you wheel it for the first time.. It is nice to find one in that condition, I would not let the paint bogg you down about it.. I have the same rig just a little more miles and love it.. You will too..
 
eldgenb- I'm sure CDan will chime in on this one, but AFAIK, the 40th emblems were available in 2 colors depending on what paint color they went on. Lighter colors got the black pearl emblems and darker colors got the slightly silver emblems.
 
just saves you from putting the 1st scratches on it when you wheel it for the first time.. It is nice to find one in that condition, I would not let the paint bogg you down about it.. I have the same rig just a little more miles and love it.. You will too..

by the way, my 40th are color matched from the factory. that is probable why they just painted it at the same time.

Funny My 84 4runner was basically mint condition when I got it and I dented that thing up, so Im almost happy this one isn't mint on the outside!

I didn't realize they were color matched from the factory... interesting, is your's FJ80 green too?
 
eldgenb- I'm sure CDan will chime in on this one, but AFAIK, the 40th emblems were available in 2 colors depending on what paint color they went on. Lighter colors got the black pearl emblems and darker colors got the slightly silver emblems.

so the lighter "Sage" color got black pearl and the "Green" got silver emblems?

My main reason for a post is I couldn't find a decent close up of an emerald green 40th to compare too. But I didn't think it had silver "40" badges!? But what the hell do I know It's not even technically mine yet... can't wait can't wait... Feel like a kid on Christmas Eve trying to stay up late enough for... Oh sorry, ramblin'...
 
84runner- the "silver" emblems are actually dark enough that they are tough to distinguish from black at a distance, but they are different parts.
 
meh

Small thing compared to getting the rig you want. An as previously stated just saves you from scratching or knocking it off yourself when you wheel it.
 
So how do you guys think is the best way to clean the "40" badge and sticker?

Can I pop the 40 off and if so what if any solvent is safe to clean it with? I assume it's metal?

And what do you guys think of sanding the sticker as previously stated?

Thanks for all the responses...
 
Last edited:
Elmariachi described his method of retrieving the emblem and sticker off his 40th that was involved in an accident and that I now own. He sent the 40 and the sticker to me and I had a sign shop scan the sticker and print up some new ones. I have since reapplied the new sticker and it worked great. The shop sold me some transfer masking tape and some backing glue tape and it was a pretty easy job once the process was figured out. The scanned sticker isn't quite as sharply defined as the original but could be with some time manually rearranging the scan's points on a computer but you'd have to be way more anal than I am to notice any difference when the sticker is back on the truck.
 
That is one sloppy re-paint......:frown: Something that blatant makes me suspect the quality of the entire repair.



There is no way to save the emblem. In fact it should be removed and the fender should be properly re-finished.
 
The emblems on the Sage Cruisers are black pearl/black chrome.

The ones on the Green Cruisers I have seen are black with a silver outline.

The "th Anniversary" are black on the Sage and silver on the Green.


The "40" is made of mylar. I would think you could save the 40, but the lettering is history.
 
That is one sloppy re-paint......:frown: Something that blatant makes me suspect the quality of the entire repair.



There is no way to save the emblem. In fact it should be removed and the fender should be properly re-finished.

Wow, this really sounds bleek coming from you, are sure there is "no way to save the emblem"? And I see from Creeper's post what it is supposed to look like! Wow.
 
That is one sloppy re-paint......:frown: Something that blatant makes me suspect the quality of the entire repair.



There is no way to save the emblem. In fact it should be removed and the fender should be properly re-finished.

Somebody had to say it.

Doesn't seem like something a professional body shop would do. Hopefully it is just a poor paint job and there is not bondo filling the driver side body.
 
Wow, this really sounds bleek coming from you, are sure there is "no way to save the emblem"?


Yes, I am sure. The emblem is actually the least of what I would worry about. It bodes to be the tip of a potentially ugly iceberg. If the part that shows is that shoddy what does the rest of the job look like??
 
I think the quality of the camera phone picture might be making it worse than it actually is in person. The pixelation makes it look like the paint is all bubbled or lots of drip marks. I'm thinking this is just the resolution of the camera.

So let us know if that picture really does the actual paint job justice or not.
 
Somebody had to say it.

Doesn't seem like something a professional body shop would do. Hopefully it is just a poor paint job and there is not bondo filling the driver side body.


I totally agree. And believe me that was on my mind. I will see the owner and paperwork tomorrow to see who and what was done, I did the tapa tapa test and it doesn't 'appear' to have obvious bondo, Chr!st it's been 8 years since the body work was done, and it's still there and intact. The owner stated that when they did the paint job they couldn't obtain new 40th emblems and decals, (sounds correct, right?), was this true even in 99? Not that this is an excuse for drips and not taping it off, hell I use spray cans and know that!

Paint I'm not worried about... I'm worried about these emblems and stickers!

So can anyone confirm that the
"40" is made of mylar and they are black with silver outline?
like Garth stated? (thanks Garth!) Anyone else have pictures or links?

And how can I get them off, I saw Elmariachi's totalled post but I didn't see anything about the emblem?

Got a link?

Thanks guys
 
I think the quality of the camera phone picture might be making it worse than it actually is in person. The pixelation makes it look like the paint is all bubbled or lots of drip marks. I'm thinking this is just the resolution of the camera.

So let us know if that picture really does the actual paint job justice or not.

Unfortunatelly I took a number of cell cam pics and this was the best one! Granted it is pixelated, but it shows the drips which is why I chose it. And compared to Creepers pics these are definately painted over, that much is clear.

I'm pretty sure I can fine sand the decal with like 2500 grit and buff it out, that shouldn't be a prob. But the 40 emblem I'm most concerned with.
 
Back
Top Bottom