Recent content by zz502SS69

  1. Z

    Exhaust manifold studs -

    Since you already are waiting on new studs, might as well use them. I would use plenty of anti-seize and torque them German-like (good and tight). Personally, I would have gone to Ace HDWR and gotten some grade 10.9 studs and anti-seize and popped them in. With anti-seize though, you have to go...
  2. Z

    Brake Hoses

    Sorry for the long rant below but I've got other posts oustanding and this should answer most others for now: It's been raining for 8 straight days here in north Florida (J-ville). Between rain, this weekend I R&R the steering rack, pump, reservoir, pressure & return lines and even put in a...
  3. Z

    Brake Hoses

    You know, I think you're on to something! Besides my 04LX, I also have an 05GX. Both have Ironman lifts and I did put Metaltech extended length SS brake lines in the rear of the GX to keep from ripping the hoses on full droop. I ordered the GX hoses before I got the ones for my LX and the...
  4. Z

    Bumper and winch fitment question

    Beautiful job tying it all together! Nice looking winch! I actually like the Badlands winch hook more than any others. That is one purpose built hook! I can see more utility in it than even my Factor 55 Flatlink E. Had I to do it again, I would just go to Harbor Freight and buy one of those...
  5. Z

    Transmission temperature on a late model 100 series

    The sender is right below or next to the oil filter. That's where the gauge gets the reading. I was thinking of installing an aftermarket electronic gauge that displays a digital reading, as oppossed to the factory gauge. I know all you need is 10 psi at idle as long as it goes up when RPM goes...
  6. Z

    Anybody else waiting on Ironman orders?

    In July of 2020, in the thick of the scamdemic hysteria, I ordered two lifts, one for an 04LX (FCP, stage 3) one for an 05 GX (Nitro, stage 2, didn't have stage 3 in stock). Also ordered a bumper and winch for the LX. I received my parts in Nov 2020, again due in large part to the global...
  7. Z

    Transmission temperature on a late model 100 series

    Thank you, sir! I have a Samsung phone so I'll give it a shot. Do you or anyone know if Scangauge or if torque pro can read oil pressure? Talking about an 04 LX470.
  8. Z

    Bumper and winch fitment question

    Good deal! Great you figured it out. The thing I really like about the ironman bumper is that it has a HD ctr bracket that the winch bolts on to. It has plenty of room for the ironman winch (which has a 256:1 gear ratio) and has a hose for waterproofing the internal gearset, which I ran to the...
  9. Z

    Brake Hoses

    I got mine fro SLEE and it came with 6 hoses, one for ea corner and 2 for the upper & lower ctr rear. My lift is about 3" in rear and I was concerned like you about getting longer hoses. The Slee hoses for both CTR rear are about 2.5" longer than stock, so on full droop that will keep your hoses...
  10. Z

    Bumper and winch fitment question

    I've got the Iron Man bumper and Ironman 12K winch w/synthetic line and Factor 55 FlatLink E on my 04LX. I wasn't happy with the original fitment of it because of the 1/4" gap or so, but you can control the gap up to a certain point due to the center bar that will interfere with the hood opening...
  11. Z

    Transmission temperature on a late model 100 series

    Nice! Is that Torque Pro or another pgrm? Besides my Scangauge II, I also bought a Kit Best OBDII plug-in and am wondering what's a good prgm to use on my phone. Specifically, I can't read oil pressure on my Scangauge and would like to know if Torque Pro or others can read it/display it. Reason...
  12. Z

    Transmission temperature on a late model 100 series

    Old thread but for those who want to know if it works in summer 2021, yes sir! Sure does! I can now flush the trans and know the temp to read it to check it for final top off.
  13. Z

    Transmission temperature on a late model 100 series

    Holy Jeff Spikoly - been trying for hours to figure it out and the above codes worked on my 04LX! Wow, thx!
Back
Top Bottom