Recent content by Windycity

  1. Windycity

    Wanted BJ40 “B” Diesel engine- idler shaft and idler gear wanted.

    Thanks for the offer. My engine has been completely rebuilt minus this issue. So I’m just looking for the two small parts. Not a complete engine.
  2. Windycity

    Wanted BJ40 “B” Diesel engine- idler shaft and idler gear wanted.

    Wanted- BJ40 “B” diesel 2977 (1978) engine- idler shaft and idler gear wanted. Any leads would be appreciated. No longer available new.
  3. Windycity

    Wanted BJ40 “B” Diesel engine- idler shaft and idler gear

    Wanted- BJ40 “B” engine- idler shaft and idler gear wanted. Any leads would be appreciated. No longer available new.
  4. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    Here’s the latest. I went to time the Injection pump, and it looks like the pump was put on, on the exhaust stroke, not the compression. Probably had major detonation issues. Btw, that was done by a professional engine shop, not me!! Hopefully that’s the problem
  5. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    Here are the basics of my 12V glow system operation manually through a “Wilson switch).
  6. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    It’s hard to tell. I’ve done some further investigation. Please look over my latest post and let me know what you think.
  7. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    Here are a few more. Also my plugs are burning or breaking away almost flush with the contour of the top of the pre-cup dome.
  8. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    Here are more pictures. I have a simple “Wilson switch” to a glow plug relay set-up. I don’t believe that the alternator could over power it, but I tried to troubleshoot it anyhow. -I did a drip test of my injection pump ( just rebuilt). It is about 6 degrees retarded. I’m starting to think...
  9. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    Thanks for the reply. I’ll send pictures in the morning. I do have it set-up for 12V. Thanks.
  10. Windycity

    Help! 3 broke/burnt Glow plugs from the same cylinders.

    I have a 1978 Toyota “B”. It’s been totally rebuilt. 5 miles on it. Case, Head, valves, cylinders liners, pistons, injector pump, injectors all rebuilt. After test driving I continually (3X) have a burnt or broken glow plug on the number 1 cylinder. I’ve removed the head each time to...
  11. Windycity

    Throttle Linkage Connection FJ60 with Weber Carb (and electric choke)

    After some searching. I believe it’s a technical issue because I’m somewhat new. Here’s what it looks like when I click a name:(no “ start conversation”.
  12. Windycity

    How to send PM's

    Woody, Is this the case with me, I can’t find a way to PM someone? I’m sure it’s probably operator error.
  13. Windycity

    Throttle Linkage Connection FJ60 with Weber Carb (and electric choke)

    For the life of me I can’t figure out how to PM someone on this site. How do I do this?
Back
Top Bottom