Recent content by wildsidelife

  1. wildsidelife

    Best 80 series rear drawer camping setup

    Here's a super simple set I made that I thought I'd only use for a little bit but have been using for a couple years now with no issues. Just did 3/4" oak for the beefy frame (main platform and side wings, and the 3 legs down). 1/2" for the inside drawers and got some slides on amazon. Was...
  2. wildsidelife

    91 FJ80 brake issues

    Just wanted to update you all. I rebuilt the drums. Found two leaky brake cylinders in the process. Still had a strange pedal feel when finished. I had a shop power bleed in case that was my issue and it turns out it was. It seems I'll be in the market for a power bleeder. Didn't realize how...
  3. wildsidelife

    91 FJ80 brake issues

    I changed out the chassis-axle soft lines for extended ones to account for the lift. Haven't touched any hardlines.
  4. wildsidelife

    91 FJ80 brake issues

    👍
  5. wildsidelife

    91 FJ80 brake issues

    You're right, they have been very wrong in the past so probably not a good idea to take their advice. I'll gladly change everything just for peace of mind. Could the slight pedal drop be related to the rear drums?
  6. wildsidelife

    91 FJ80 brake issues

    So I changed the front calipers and bled the system (correctly this time) and we are back in business! She stops pretty aggressively now (for an 80) when slamming the brakes, so I feel much safer now. However, when I press the pedal lightly, it seems to be slightly sinking. I think when I...
  7. wildsidelife

    91 FJ80 brake issues

    I do indeed think the issue is from inadequate bleeding of the system, but I decided to just pull the trigger and fork up the extra cash for rebuilding the front and rear as well. I figured if I plan on doing it eventually I may as well do it now. As @ColoradoBoy stated, brakes are not exactly...
  8. wildsidelife

    91 FJ80 brake issues

    Rebuilding/replacing everything is definitely on the list (although I'm basically halfway through the list already). I will be knocking calipers and drums out afterward, but would like to solve this problem first for peace of mind and because I would like to avoid replacing parts that are in...
  9. wildsidelife

    91 FJ80 brake issues

    I didn't think I needed the FSM for bleeding, but I guess I do... This was actually my first time bleeding brakes being on the "bleeding" not "pumping" side, so this may very well be the problem. I missed that the other end of the tube needs to be submerged. I also definitely bled for over a...
  10. wildsidelife

    91 FJ80 brake issues

    So I've been having issues with my brakes on my FJ80 for a little bit now. It has about 220k on it and I do wheel it pretty hard. FYI, I love working on my car, but I am very new to all of it and am by no means a mechanic, I just enjoy building, romping, breaking, and repeating. It all started...
  11. wildsidelife

    3FE stalling issues

    That could very well be the case. Like I said previously, I am no mechanic and just getting into these things so a lot of the EGR system is a mystery to me, but I do know it causes a lot of issues and many people end up just removing the whole thing or going with the bb method. Unfortunately I...
  12. wildsidelife

    3FE stalling issues

    UPDATE: I had some cruiser heads take a look at it and after some searching, they stumbled upon the issue. We now know where the issue is, but not yet why: When taking out a few vacuum lines to check for leaks, they unplugged a connector powering the pump that pushes more air in the exhaust to...
  13. wildsidelife

    3FE stalling issues

    Agreed, that cable has seen better days and should be replaced. I can give that a try as well. Thanks for pointing that out. Didn't cross my mind that it could be contributing to the issue. Although I do think it's still seal related, new parts never hurt.
  14. wildsidelife

    3FE stalling issues

    Not sure if that's oem as I'm the 3rd owner, but good to know it should be flexible. It was still flexible and not hard crunchy like some of the hoses I've come across. The PCV hose attached to it was replaced before me.
  15. wildsidelife

    3FE stalling issues

    I have not tried that AC trick, but even if it does work it's only putting off the issue. I'd like to fix it completely, as I burn through enough gas with the AC off😂 I'm pretty confident it's a vacuum leak of some kind, just can't seem to find it. Also, an update: I've replaced a bunch of old...
Back
Top Bottom