Recent content by We Sing

*green/brown!

Olive Green :-) 653 depends on light.. grrn/brown! wunderschön !!

I managed to remove the cover from the inside. I did have to make the opening a little larger, but I’ll weld it back together neatly and repaint it. A small “scar” underneath the floor mat :-) won’t be a problem. At least I didn’t have to drop the gearbox. The problem was indeed with the pins...

:) I took the wrong screenshot. I’m also going to try a new cover first. I have one lying around. Thanks for the answers and explanations. It’s great that everyone can help each other out!

Hi, which pressed-in pins do you mean?

Thanks for the video! I think the vehicle’s floor pan in my truck is more than spacious enough. I’m just going to give it a try. Good luck finding and solving your problem. If I run into a different problem after replacement, or end up having the same issue, I’ll get back.

Hi Trevin, I’m still having the same problem. It will come out of 3rd gear even when the engine is switched off.. the shifter simply falls out of 3rd gear. When I’m driving, it stays in 3rd gear as long as I keep accelerating. As soon as I let off the accelerator, it pops out of 3rd gear. The...

Hi All, I’m chasing an oil leak issue and could use some advice! After a long drive, I consistently find a small puddle of engine oil under my car. I’ve already replaced all oil lines and copper washers going to and from the vacuum pump. The vacuum pump itself is completely dry on the outside...

I made a nice little 3D design for the Toyota Land Cruiser HJ60 turn signal. Not sure of the exact name, but it works perfectly. It’s the plastic bushing/cam under the steering wheel that automatically cancels the turn signal after a turn. After 42 years, the original one was completely worn out.

I took a closer look. You don’t hear a click in 3rd and 4th gear. In 3rd, the gearstick just falls down when the engine is off, and when you shift to 4th, there’s no proper click either... no positive engagement I think. Sounds like a detent mechanism issue... The gearbox probably needs to come...

Thanks for your answer. When I shift into 3rd gear, it feels normal. You hear the shift noises, but the gear lever just falls out due to gravity. This happens even when the engine is off. I have the FSM and a complete gearbox rebuild kit. I want to rule things out first. I’m going back to...

Found the color, its 653 with some adjusments. Thanks for the help and tips

Hello experts, I have an H55F gearbox, and it works fine! However, it keeps popping out of 3rd gear. If I hold the gear lever, it stays in gear. Even when the engine isn’t running, the lever just slips out of 3rd gear, as if a spring or something inside is loose. Has anyone experienced this...

With a little help of Copilot :-)