Recent content by tyjova

  1. T

    What Did You Do with Your 80 This Weekend?

    That's super helpful to see, thanks!! For some reason I was struggling to find a decent picture of how somebody got it to fit on there properly with the lip of the console coming up a bit. I did consider making some sort of base plate to make it level so good to know it's a decent solution...
  2. T

    What Did You Do with Your 80 This Weekend?

    3D printed out a new cup holder, still trying to nail down the best placement since it’s a little awkward by the shifter so here it sits for now. Pretty neat little solution!
  3. T

    Knuckle rebuild issue

    Hahaha sorry to disappoint the masses. Fingers crossed there’s not a part 2 to the story but if there is I’ll be sure to keep you in the loop
  4. T

    Knuckle rebuild issue

    Thanks so much for the help everybody, quick update! Sorry for the hard to tell pictures, I did use front seals so that wasn't the issue. Took the hub on and off another handful of times trying to nail down where it was binding up. To get a better view of the situation I actually pulled off...
  5. T

    Knuckle rebuild issue

    Torqued to 30 I don't think it would rotate at all. Or very little with quite a bit of force. Mostly all by hand just on the hub itself. I tried with the wheel on to get some leverage but it wouldn't budge, though I didn't give it a ton of force. I considered trying to push a bit harder on it...
  6. T

    Knuckle rebuild issue

    Good point, I'll double check. I'm pretty sure it's just the angle and the shadows but it wouldn't hurt to confirm. Haven't even gotten to the driver side yet. What was supposed to be a nice Sunday afternoon project has of course dragged on for much longer :facepalm:......I had a huge tub of...
  7. T

    Knuckle rebuild issue

    Sorry, was out of town for work and was just typing up a reply this morning! After several days of double checking and having the hub on and off god knows how many times.....I'm still stuck. As it stands I've confirmed the races have the fatter sides pointed inwards so they line up properly...
  8. T

    Knuckle rebuild issue

    Everything fit together and spun well on the hub so I could have sworn it was all in properly but the only thing I can think of is something backwards like you said since something is obviously not correct. I was hoping to not have to mess up the inner seal to double check the rear bearing but...
  9. T

    Knuckle rebuild issue

    Just wrapping up a knuckle rebuild on the passenger side, and running into some issues on the reassembly steps. I'm putting the hub back on to the axle and then working on the bearing pre load/nut tightening steps. When I get that hub on it spins relatively well, though maybe a little tighter...
  10. T

    Wits End Order Issues / Joey Romero

    Went through a chargeback procedure a while back, but went back to the web site to check on how things were looking. When I'm not logged in, I can look at all the products, tools, etc. I logged in and went back to the same page and then get: Went back and forth multiple times logging in and...
  11. T

    Registry 8x Series V8 Swaps

    The stock pistons are more so on the end of not being reusable than anything. I'd love to have gotten a 6.0 as that was the original plan but I came across this 5.3 in decent shape for a killer deal so it was hard to pass up. I think what the plan is going to be is getting a full kit together...
  12. T

    Registry 8x Series V8 Swaps

    Working through a 5.3 rebuild now. The internals all look to be in pretty good shape for what I believe to be around a 200K motor, but I figured since I have this thing down to the bare block, I might as well replace most all that I can so that I know it will be solid for a long time. Just a...
  13. T

    Registry 8x Series V8 Swaps

    Makes perfect sense! I like the idea of the 6 speed so maybe I'll lean towards 4th gen, but like you said in reality anything that gets put in there is going to feel like a massive upgrade. I think you're right, I'm probably getting too much in the weeds on this when really if I just keep an eye...
  14. T

    Registry 8x Series V8 Swaps

    That’s awesome info thank you so much! I think that’s the main part that I’ve been getting hung up on now as I’m searching around salvage yards for motors. Seems like while maybe the 6.0 is a bit better for the larger size, 5.3 is the more cost effective route. I think what you mentioned about...
  15. T

    Registry 8x Series V8 Swaps

    Hopefully this isn't too dumb of a question, I feel like I've done nothing but read build threads and watch videos on swaps lately and my brain is fried.... It's come to the point that I'm ready to swap out the old tired 3FE for something that can comfortably and reliably pull up and over...
Back
Top Bottom