Recent content by tpromano

In case anyone digs up this thread looking for answers on the black box, as I did.... My FJ60 has the same black box installed with identical wiring to and from the box. Schematic orientation: Looking at black box with wires from truck on top, and wires to trailer connector on bottom...

Looking for the FJ60 2F carb insulator, PN 21165-61010. Adding tags for search-ability… 2116561010 21165 61010 Thanks.

Maybe email these guys asking for the STL?

Whatever the manufacturing method is, we won’t be able to preserve NLA parts if there isn’t a CAD file out there. yep. Open to requests for CAD models. Otherwise I will probably make them as my ‘60 requires!!

Ha! …mostly for anyone who wants something quickly without having to pay for shipping. Is it a better choice? Probably not. Do people like using stuff they print? Yes! Good point though, I will have the CAD files for reproduction if something becomes NLA.

Thanks! I’m hoping to create a library of printable cruiser parts to share.

I used PLA. ABS would definitely be more durable. I don’t think TPU has the stiffness the clip requires.

Hi all, Attached is a STL file for the hood rod prop clip. I printed and tested the clip in various orientations. In terms of strength, I had the best luck printing in the two orientations shown below. Pictured below was printed at 100% infill and .3mm extrusion "draft" settings. I plan on...

Just experienced the exact same issue. I was dreading trying to think of the keywords to narrow this problem down on mud! Cleaning the accelerator pump outlet with a bristle from a wire brush solved my problem also!!

Did you use anything special for the closed cell foam?

When you need a hitch you need a hitch….

Hitch still available?

I just stripped and repainted my air cleaner assembly because I would get paint flake build up in my carb which would create clogs, bringing my driving to a halt!

Good point…. I used the goopy Aircraft Remover to get most the paint off. Kind of a pain in the ass getting in the cracks and crevices but worked well!

Thanks for the response. I ended up getting the black engine enamel. Just finished stripping and spraying my air assembly. Excited to reinstall!