Recent content by TDi

Anybody knows?

Yes thanks! :)

Thats maybe true :)

Pinjon pointin straight forward and its 87° Transmission output point straight to the back and its 87° More pictures. Does it seem right

I will try jeep double cv shaft if that helps

No it feels "normal" :l no movement or slack, no leaks. But it gets pretty hot after driving is that normal? I even change t-case oil yesterday to 85w140 I do not hear clearly where the sound comes from. But im 100% sure its not the diff. Here is better picture of pinion angle. the...

i tried with home made shaft (way out of balance). Its still there, if you give little gas and let off.

Okey yes photo is taken when it was out of specs, i tryed differend angles i have adjustable upper control arms. But still no good :( I tried double cardan shaft it gives very bad vibrations.

Maybe, i dont know what to do? :D Or does it sound like t-case? Driving with only front shaft and 4wd on, there is no noise. And tryed without rear drive shaft 2wd no noise. Want to be sure before spend any more money in to it.

Its not out of phase i tryed 180° and 90° no change. I have 3 of those drive shaft and 2 of them have made in "driveline shop"

I have new u joints. No play. Minimal play in slip. Normal play in t-case and diff. This is mystery its like the angle is wrong but its not. Can normal u joint be side ways? I mean nissan diff is on center of axle and toyota transmission output is right hand side. Do it have too mutch angle...

Hi. Sorry my bad english... I have toyota engine in my nissan patrol and all works perfecly except that rear drive shaft... I have adapter plate to nissan diff and 60serie drive shaft. It have new u joints. I have measured pinion and transmission angles with angle finder and adjusted those. It...

"Using the DSL1's custom CAN broadcast, functions I've figured out how to control the actuator of this Holset HE351VE variable geometry turbo. Right now it just works with a potentiometer but it'll be mapped to engine load and RPM so it'll work like it would(ish) on the 6.7 Cummins it came off...

Okay thanks! Good to know that is s***. :) But where can i find mls gasket?

Blue is burning oil. white is the poor burning of diisel. (Bad smell, eye burning?) bad compression pistons/sylinder, valves, head gasket (+leaks water or oil) Wrong injection timing, bad injector (spray pattern.) Bad injector pump. :)