Recent content by T3QCruiser

  1. T

    Gas tank building excessive pressure & fuel smell. Dangerous for sure! Why does this happen?

    Price is the same for either and tether feels like cheap insurance when wife drives. 🤣
  2. T

    Gas tank building excessive pressure & fuel smell. Dangerous for sure! Why does this happen?

    Not sure if this is in response to my post above but I agree, I want an OEM fuel cap, especially after seeing the STANT cap that was installed by the previous owner come apart. My question was more oriented toward WHICH OEM cap to get, the untethered part called for in the 98-99 years or the...
  3. T

    Gas tank building excessive pressure & fuel smell. Dangerous for sure! Why does this happen?

    Same issue here with my 1998 LC. I live in a warm weather climate and have driven it for 3 years here and never noticed any fuel smell or abnormal fuel tank pressure. The gas cap does vent pressure when opened when warm but only a second or two. Went wheeling this weekend and noticed A LOT of...
  4. T

    100 Series Fuel Filler Cap Differences?

    I've owned my 1998 2UZ Land Cruiser for 3 years and it's had a Stant 10825 aftermarket fuel filler cap presumably for many, many years from the previous owner. I've read about all the fuel pressure issues people have had and was pleased I never had them...until this week as the weather has been...
  5. T

    New dissent offroad no cut rear bumper!

    @Skidoo I see where you are coming from on the adaptors. Surge brakes suck but they have a place on boat trailers since electric brakes could short under water when loading the boat in or out of the water...Almost any small U-haul or utility trailer is still a 4-pin and it's nicer to not need an...
  6. T

    New dissent offroad no cut rear bumper!

    The connector I referenced has both a 7 pin and a 4 pin so it's the best of both worlds and includes a reverse wire (blade atyle 7 pin are wired this way). As for disabling brakes while backing up, a good brake controller can accomplish this too. My Tekonsha Prodigy 3 has a brake lockout mode...
  7. T

    New dissent offroad no cut rear bumper!

    Any reason the 7pin trailer plug couldn't be switched for a Hopkin's 40975 Multi-tow unit? Obviously the mount hole would need to be modified to accommodate this style plug but might I recommend it instead of the one you're using? It's a much more OEM solution that's used on so many vehicles so...
  8. T

    FAQ Stereo FAQ

    Ok, me again. I called PAC and they are suggesting I try the LP5-4 which has gain adjustment and an optional ground wire. I wonder where I should ground it, at the ground from the factory harness or just chassis ground? Nice thing about this unit is it features 4 channels in one device. Had I...
  9. T

    FAQ Stereo FAQ

    This is who I was speaking with just FYI... Navone Engineering Inc. » About David Navone
  10. T

    FAQ Stereo FAQ

    Ok, reporting back, I tried two PAC LC-1 Remote Amplifier Level Controllers (one for front and one for rear) and it was ultimately a failure overall but, it was successful in getting rid of the amp hiss and lowering the overall volume of my HU so that the volume control was more controllable and...
  11. T

    FAQ Stereo FAQ

    @suprarx7nut, I agree for the potential of the potentiometer to be too late in terms of the hiss but I am feeling determined to try it, at least to give me a bit more volume adjustability at the HU before being too loud. To clear up a few things, my HU isn't an "android HU" it's got Android...
  12. T

    FAQ Stereo FAQ

    Ok, so count me in as another 1998 Land Cruiser (USDM) owner with a slight hiss/white noise after installing an aftermarket HU with the metra style amp integration harness (def a cheaper HU but has Android Auto which is what was important to me). A secondary issue is that the variable volume...
  13. T

    Oil filter cooler o-ring part number

    Totally agree but the hard part is everyone claims the 2UZFE is not an oil leaker so it's hard to find a "usual suspect". I daily drive it and I'm at a stage of life where 1) I don't have the disposable income (or desire) to pay someone else to diagnose/fix 2) I barely have the time to clean it...
  14. T

    Oil filter cooler o-ring part number

    Any updates on this @petveedub? I'm chasing down a pretty substantial oil leak that's leaving two fresh drips every time I park it (although I don't see much loss on the dipstick in 4000 miles). Funny thing is, it didn't drip at all with the skid plate off for a few weeks because I think it only...
Back
Top Bottom