Recent content by stoneydukes

I called 2 dealerships here north of Denver and none of them wanted to do the work. Good luck

For those with a 2003 and up, the part number was 45280-60610, or at least that's what I had to order for mine. The shank part in 60610 was definitely beefier than the original.

same experience here. I had to remove the backing of the white piece.

Mine is a 2003 and there are a couple differences between this one and the one in the video. I’ll take some photos as I work through for others with 2003+

Thank you @kingdom77 for the tip on the cut socket. I went to harbor freight and bought the long locking pliers but couldn’t get anywhere near enough torque. This is what mine ended up looking like. 10mm with 2 faces worth of cut out. Part is on order and the fun part is still to come but at...

I appreciate your response and certainly don't want to ruffle feathers as the FNG on here, but I'm asking if the difference between the 60610 and 60510 part numbers are in the housing (throw away for this project), or in the shank (critical piece for this project). The 60610 part is available...

I have read through a number of pages and it seems that the OEM PN for my 2003 LX is 45280-60610 and not 60510. These part numbers are for the whole assembly. Can/will anyone confirm that the rod I need to extract from the assembly is the same for my 2003 with power telescoping? I am not trying...

any input on the PN links? for what I need on my 2003, is there any difference between the 3 linked PNs?

This just happened to me last night. Car is DOA in the Chipotle parking lot. I have a 2003 LX 470 and have done a search on PN 45280-60510 and have gotten a wide range of results / prices depending on source. Since I'm not using the entire assembly, can anyone tell me if there is a difference in...