Recent content by Sand Man 1

  1. S

    '76 FJ40 Hard top painting job

    After years of fiberglass work on race cars and my street car stuff, I've learned on common mistake people do is try to build up fiberglass with bondo. It should be done with fiberglass until the shape is final, then a skim coat of filler, then a few coats of high build epoxy primer. Too often...
  2. S

    '76 FJ40 Hard top painting job

    Just a couple tips: to prevent fiberglass repairs and strands from showing later in life, always do any repairs from the "front" or more specifically the side that shows. Also, use a good two-part epoxy primer, I use House of Kolor's stuff. Last, make sure to use a sealer. The sealer hides...
  3. S

    The Wall of Shame

    The springs control the rate of opening. The lighter the spring, the faster it opens. Which is why drag racers use a lighter spring, to help it open quicker, to avoid leaning out the carb once the engine sucks the blades open.
  4. S

    The Wall of Shame

    Just one more (sorry I only recently joined so I'm replying to long-forgotten posts) on vacuum-secondary carbs, the diaphragm closes the secondaries, engine vacuum opens them. I learned this when a local guy disconnected the diaphragm from his '70 Z28 in an effort to get better mileage by...
  5. S

    The Wall of Shame

    Just a side note, this was fairly common in the '70's in drag racing. The wood insulates the carb and prevents vapor lock. These days they actually make phenolic spacers, but do the same thing. This guy may have actually had a reason for this. Just guessing...
  6. S

    Disc brake conversion advice

    Thanks all, I really appreciate the input. Looks like I'll be on the lookout for Toyota stuff!
  7. S

    Disc brake conversion advice

    I appreciate everyone's response, but here's my reasoning for swapping to GM brakes: here in Southern Oregon, Toyota 4x4 parts are high priced, typically beat up and hoarded like gold. I agree 100% with melvinjo, there's just not a lot of these things around and they too fall into the "gonna fix...
  8. S

    Disc brake conversion advice

    I just joined this forum and am glad I did. I bought a basket case but solid '71 FJ40 recently and am starting to order parts to prep for some winter build fun. One of the things I want to do is swap to discs all around, and I see the GM swap seems like a good setup with Monte Carlo calipers in...
Back
Top Bottom