Recent content by Rustproof

My thoughts too. I think I’ll put them in the old parts bin!

Thanks for checking.

No, I kept those clips together with the visors. I think maybe the PO put them in. I think they were in the cargo area above the windows. I should have taken pictures before I took them off!

I’m replacing my FJ 62 headliner and am putting the grab handles and lights back and can’t remember where these hooks go. I can’t find them in any online photos.

The first 2 pictures show the wiring coming through the top of the lift gate with the washer fluid tubing. It doesn’t reach the wiper motor connector which is in the second 2 picks.

Thanks, I’ll check it out. I see they have “rear wiring harness” at cruiser parts.net and not sure if this includes the lift gate wiring.

My rear wiper does not work. I removed the 2 metal panels on the lift gate and it looks like there is a segment of wiring missing. There is a connector in the small panel area and the wiring connector on the wiper motor but not connected or enough length. Any ideas on where I can get wiring to...

Putting the heat control assemble back in, I can’t remember where this plastic shim goes. On the right side of the heater control between metal frame and the unit?

I put in the reflective tape and LED, did you put that little white plastic thing back in?

That looks awesome! I will try the reflective tape trick. Thanks

I’ll give that a try, thanks.

That’s what I thought. Just don’t want to ”pop” something that’s not supposed to pop!

No light in my heater control. I have ordered a replacement bulb from SOR but not sure where the bulb goes. Do I have to pry off the front lens of the controls? It looks like it might come apart>

I have a cracked lower trim panel and have ordered a used one that sounds like it will be in better shape than mine. I took the trim panel out yesterday and figured out how to remove all the switches. The ash tray has some screws but the cigarette lighter seems fitted to the plastic (no tabs or...

I figured out the problem. When I pulled the instrument cluster forward the wiring harness came apart so that is an easy fix! I also found the “switch lighting” bulb in the white plastic insert.