Recent content by queequeg

Even after trying to bribe the rear sway bar bushing bolts with PB blaster and a propane torch they ungraciously rejected my offerings and decided to break. They didn't take much torque to go. On the passenger side I know I can just knock off the tack welded bolts and replace them with grade 8.8...

Yeah, picked up the slee 2.5" Medium kit last night. I came to the conclusion that if I did fix it, even at no cost, I still wouldn't trust it.

Height sensors seem to be working fine. I also switched the relay and checked the fuse in the fuse box.

A month or so ago my AHC started acting up. I was driving with a few hundred pounds of firewood in the back, I went over a medium sized bump that extended/compressed the suspension more than usual and my AHC "OFF" light started flashing. Got home just fine and the next time I started up the...

It's a cyclical squeaky noise, the cadence follows the throttle in park or when moving. It sounds like it's coming from above the rear axle or gas tank area. It's not an exhaust hanger or heat shield, at least I highly doubt it. What do you guys think? Video below, pardon the surface rust: New...

Checked with OBD, no faults. Disconnected battery for an hour. CEL is still on. Really odd.

The first 3 images are clicking down the "Engine and ETC" tree, they are in reverse order. I'll follow that procedure and try again. I don't have scanner, but I have a bluetooth OBDII module and Torque Pro, is that sufficient? If so, I'll check it tonight when I get home.

I removed the negative battery post for a minute and I have the same issue. I've attached some images of the techstream output. Can anyone out there with more experience help me get back on the path?

I'll give it a whirl.

I had a CEL come on the other day. Nothing seems off, still running strong. I ran techstream and there were some old codes in the history, 2 codes associated with a faulty key in the history (probably dating back to the previous owner) and two sets of current codes. One regarding TPMS and one...

I honestly don't get the hate on NAV 100s. I have two other vehicles with brand new tech and I never use it. I use my phone for everything media and info related. Install a BT45-TOY in 15 minutes, get a decent mount for your phone and you have everything you'll ever need.

Android users, in the devices bluetooth settings you can set the BT-45 to handle media audio only. So you can use the OEM heads-free calling. Old thread, I know, but I think this will be valuable for people that search. I went back and forth on the Vias vs USA Spec but now that the BT-45 is...

Would you be willing to make these again or at least share the drawings?

Weather couldn't be better for this time of year. I doubt you will encounter any appreciable snow at any altitude.

I'll come up with something. Once I have a solution I'll post it and see how many orders we can get. If it's enough for a small run I'll open it to a group order.