Not an expert, but fixing that crack will be the tell. If the wobble caused the crack, or it was the crack that caused to wobble. Chicken / egg situation. My luck is usually finding what I think is the problem but then learning the root cause is something else. I hope yours is the opposite.
I’m serious, unfortunately. I ordered one of the reproductions on Amazon… I thought since it’s in the engine bay it wouldn’t be “gas soaked rag flammable”, so when I saw about 20 flies on it I lit them up. And sadly, I was wrong about the flammable part.
Got a chance to swing up to Jason’s place in Redding (Trail Tailor). Picked up a pair of rear upper control arms and got around to installing them today. They’re miles ahead of the aftermarket RUCA’s I had on there, and it was nice to install something that just “goes in”. Haven’t been able to...
Turns out, with enough effort, you can turn an easy job like bleeding the brakes into replacing all the calipers. Also giving away a cool piece Solvefunction made up for me, so that’s neat.
I just recently started a rebuilt 1FZ, from a 94. I don’t know the shop that build it, but I’m seeing some issues in quality… I am running the “break in” oil right now, but I can shoot a quick video next to the plan if you’d like?
These are the three I can clearly get a photo of. Apparently the “rebuilder” was not concerned about the plugs being flushed. From what I can tell, all three are inserted past the block edge on the top, and the bottom has a protruding lip from the block edge. The weeping coolant is barely...
Solid feedback man. I usually jump straight to the worst case scenario, but I’ve been poking around the freeze plugs, (the two seeping) and it appears to be install error. Again, I bought the 80 with a “fresh” rebuilt engine, and this is the first time putting any liquids in it.
Those two plugs...