Recent content by Pez109

Just a normal 1HDFTE day, at 390 000k I decided I might do the radiator, water pump, timing belt, idler pulley and tensioner, all the coolant and heater hoses, new power steering lines, vacuum pump overhaul, power steering pump overhaul and some general tidying up.

Check your intake manifold nuts aren't loose.

Made my own bracket and fitted it to the flange at the rear of the airbox. I originally had it where the factory fit alarm speaker sits mounted of the side of the engine bay.

This is what it looks like from the ground, and the crappy alloy bar is gone :)

Thanks mate, its an OzTent Foxwing Series 2 270 Degree Awning. Ill drop a side on pic shortly for you.

Day out Turon River New South Wales Australia.

What I used. Grade 12.9 Inhex 70mm bolts, 21mm head size and fitted way better than the hex head bolts I had.

Gday, what would the postage be to Sydney Australia for the 3/16" ARB spacers and a set of extended 100 series front sway bar links? Regards, Pez

Mine occurred at 345000 Kilometers. Pulled it out in the carpark put my key in the ignition, screwdriver to start and drove home. Being a weekend and knowing that Toyota Australia wouldn't have an ignition barrel assy anyway, I decided to fix it. In a nutshell I drilled into each end inserted...

Whilst waiting the 3 months for my Bullbar to be built, I watched your install video about ten times. Thanks to Brady Adventures this is the end result.