Recent content by Pano Anthos

Need not be running. Looking for a rust free frame to swap into. No accidents obviously. In SC. Will take care of shipping details. You can reach me at five zero eight two three three two zero eight two.

Interested. I am in SC

All -- I have searched Mud high and low and cant find the answer to these questions to my stock 97 lx450. I’ve seen lots of posts about radiators so thank you in advance. I still have to have a bunch of AC work to be done and my only question is OEM vs aftermarket vs rebuilt for the below...

Do you have undercarriage shots?

Realize this is years later but do you have any left?

do you still have them? 80 landcruiser -- 77201-60350 -- I am based in SC.

I also figured out my problem. The wiring was loose enough in the wiring harness Unser the glove hoax that the wire would move just enough when the engine was hit so that it would not start. Once the mechanic tightened up the connection, problem solved.

Do you still have any 75435-60020 emblems for the LX450. I realize I am replying to an old post

Did you ever get to the bottom of this? I am having the exact same problem on an 97 LX450. True cold start (like next morning fine). Immediate start when its been running is fine. Leave it for an hour? Wont turn over. And I smell gas near the gas cap but an unusual level. I have had the truck...

So we figured out the issue finally. On our LX450 there is still wiring for the cellphone. It turns out that there is a wire from the cellphone to the ac amplifier that was intended to reduce the fan blower to like nothing when the cell phone was being used. Well guess what. The state of the...

Going to be in Aiken for two months and would love to find a great tech to get a nasty cel issue resolved. I’ve had my rig since 98. It’s my dd but no time to do my own work. Just love the rig. Amy recommendations would be very alleeciated

In that other thread, I learned that there is an intake valve bring outside air into the system which is used to create a mix of more moderate temps rather than just hot or cold. That had come detached in other work that the tech had done.

I tried numerous approaches and did not want to get oil everywhere -- with the screwdriver approach. So instead I bought the oil filter wrench from Autozone -- Part #W54108 for Filter 90915-YZZD3. 3/8" ratchet on it. Works like a charm.

No worries. Thank you.

I realize this is an old post, but did you ever resolve this?