Recent content by onemudder

Heater T Coolant Loss Neglect --> Starter issues ("Click" no crank) --Ground Wire? So my rig has been mostly used as a "grocery getter" and I knew my T's were leaking-- I bought bass replacements and misplaced them. Alot going on at home and I'm finally coming up for air. I figured the short...

Double din CarPlay unit here for $89 today Anyone have thoughts on this unit for an upgrade from stock console on a 100? https://electronics.woot.com/offers/nakamichi-6-8-apple-carplay-and-androidauto-touchscreen Elevate your car drives with an updated touch panel and experience how ease of...

Thanks for the advice so far. I went to re-tighten one of the brake lines on the MC. Backed it out and carefully tried to get it back on since I felt like there was a 2-3 more threads to get good connection. Ended up cross threading the damn thing and shredded the brake line connector male...

Did a MC replacement I got through Andy Le which itself went OK. I go to bleed the brakes per his instructions (pumping, beeps, etc) and have run into issues. I am not doing this with TechStream and decided to go old school buddy system. I was able to bleed the far rear PS without issue...

Need a PS panel. It's a 11 or so inch panel strip directly underneath the head light

Thanks to everyone’s tips. It ended up being the brake pads with the DS worse than the PS. They weren’t totally worn but maybe had a 1/4 inch left. However, the pairs weren’t worn evenly which led me to have the mechanic check the wheel bearings and sure enough there was a good amount of...

Thanks so much. Some really good info for me to check. I will report back!

It’s just a sound file. I updated permissions just now. Tysm !

Hey guys, very annoying “sissing” noise coming out of my front driver side wheel. Happens at all speeds but seems to lessen when applying brakes. Tried to hit the gas while applying brakes to see if it was the motion speed or the actual application of the brakes and couldn’t tell. I just...

Hi thanks for your insight. Yes, I did everything you had mentioned other than filling with nitrogen. I believe I’ve use some sort of alcohol-based flushing agent. And then I vacuumed down the system for awhile and it held pressure for a good length of time. Added the FSM amount of PAG to...

I hear you. I have 134a cans that you have to pierce. I think they stopped selling those but I still have a few left over. As for the hose gauge I have one from inter dynamics that ls probably 6 years old now. I have modern adapter for the newer can tops so I’ll try that. If that’s...

I last summer I completely overhauled my AC system. New compressor, new condenser, new expansion, TXV valve new evaporator, flushed the lines. AC was working great after all that. Fast forward. The AC system is not working like last season. When starting up the AC system it did not blow...

Denso ignition coil packs in decent condition ? All 8 or will take fewer if some look toast.

Hi, when I press down with my screwdriver the lever/lock will move it down without much fuss (I doused it with penetrant over the last few weeks). But it will bounce right back up when I release the screwdriver--- I think this is what you mean by it not holding the position. Closing the...

Has anyone ever had to remove their hood latch? Seems like a real PITA to have to remove alot of things just to get to the latch. Just want to make sure this is necessary. Can someone verify if the top brace has to be removed in order to gain access to the latch? It looks like the latch...