Recent content by MTBer

  1. MTBer

    Road test - would like some advice

    @middlecalf thanks for reaching out. I wasn't aware of your shop. I sure wish you weren't so far away. I get up that way a couple of times a year though so I'll keep you in mind.
  2. MTBer

    Road test - would like some advice

    Thanks for getting back to me. Coming out of second is fine. I'm having trouble getting into 3rd, either way when up shifting or down shifting. I'm grinding gears going into 3rd unless I'm real gentle with it and allow it to mesh in on its own. Does that give you any insight? I really don't...
  3. MTBer

    Road test - would like some advice

    Thanks for the suggestions. I hope I'm at a good starting point with it. It looks good from a distance but there's some rust in some areas that I wish it didn't have. Overall I think its in pretty good shape. I'd love to get everything taken care of but I'm torn because I don't want it to be...
  4. MTBer

    Road test - would like some advice

    Thanks @Downey for this and your previous feedback. I'd like to try and get a donut on top of the crossmemeber. Hopefully I can grind off some of the floor stiffener u-channel that is right above the mount to get the height needed. I'm curious too if I had installed the rear mounts at the...
  5. MTBer

    Road test - would like some advice

    I want to thank everyone on this forum for the wealth of information and motivation for helping me get my '74 driving again. It all started about 7 months ago with @RAGINGMATT helping me fix my radiator so I could get started on trying to fire up the engine. After getting the engine running...
  6. MTBer

    Advice - Broken Radiator Drain Cock

    I wanted to thank you guys and @RAGINGMATT for making this fix easy for me. I decided to save the radiator. It looked pretty good inside so using Matt's new drain valve was the way to go. I first made sure I could get the old steel tube out of the bottom before I ordered it. I followed...
  7. MTBer

    Advice - Broken Radiator Drain Cock

    Thanks guys. I just had to go grab some more PB Blast and will give it a shot with the hot and cold right now. A new radiator would be great but want to try this first and see if I have the option to just repair it.
  8. MTBer

    Advice - Broken Radiator Drain Cock

    I was feeling risky today and it didn't turn out well...I was hoping to get the radiator drain cock unstuck on my '74 FJ40 and managed to snap it right off the drain tube. If anyone has any advice on ways to go about fixing it I'd sure appreciate it. I see that the drain tube is threaded...
  9. MTBer

    Adjusting wheel cylinders on the drum brakes - so difficult....

    I'm just about to do the adjustment on my '74 after replacing all the wheel cylinders. I did a quick search and found this thread. As for how to get the drums off...I was having a problem getting my front drums off. I read that some like to use a torch to heat up the drums. I tried it and I...
  10. MTBer

    Advice please - FJ40 has been sitting for a very long time

    I've learned so much form this site just digging around and reading discussions on brakes and axles. I managed to replace all the wheel cylinders, brake shoes and brake shoe hardware (pins & springs). I spent considerable time cleaning the brake backing plates as well as the front knuckle...
  11. MTBer

    Advice please - FJ40 has been sitting for a very long time

    I had about half the day to work on the cruiser. I had a heck of a time getting all the brake drums removed. When I finally did I couldn't believe all the dead bugs and spider webs I found inside. Come to think of it I haven't had them off since probably 1994. I was able to adjust the shoes...
  12. MTBer

    Advice please - FJ40 has been sitting for a very long time

    Thanks. I'll take a good look at the rubber brake brake lines. I'll have all 4 wheels and brake drums off this weekend to inspect the brake lines, shoes and wheel cylinders. Not to mention I need to get familiar again with the whole drum adjustment technique. I just replaced the booster and...
  13. MTBer

    Advice please - FJ40 has been sitting for a very long time

    I'd appreciate some advice. Without writing some long winded story about why I'm in this situation, I'll just get right to it. My FJ40 (1974) has been pretty much sitting for 20 years. I'm just about to get the brakes working and I'd like to be smart about getting it ready to get out and try...
  14. MTBer

    Wanted [CA] 74 FJ40 Brake Booster Pushrod

    Update....I found the toyota part number of the push rod. Toyota shows an alternative PN that is available. I went ahead and placed an order for it at Norwalk Toyota (chose this place since its on the forum's vendor list). Crossing my fingers it looks the same. Thank you pardion for offering...
  15. MTBer

    Wanted [CA] 74 FJ40 Brake Booster Pushrod

    Alert...I'm a newbie...just joined ih8mud. I've been a lurker for way too long. Another thing I waited way too long on was getting my brake system back together. So long that I managed to loose the pushrod that actuates the master cylinder with the booster. I'd sure appreciate it if anyone...
Back
Top Bottom