Recent content by mstang

  1. mstang

    Lifted Fj40.

    Problem solved. I removed the rear gearbox mount, fitted lighter OME springs and back to stock length rear shackles. No more gearbox chatter. Couldn't be happier. The driveshaft angle is now at 9 degrees.
  2. mstang

    Lifted Fj40.

    Great pic. Thanks.
  3. mstang

    Lifted Fj40.

    It made it a little better, but the pinion angle is off in the front by about 4 degree.
  4. mstang

    Lifted Fj40.

    Yep, they are stock u-joints. I've lifted the axle, and dropped it, they don't bind. I've ordered a set of OME springs, I'll see how everything sits after that. Next step would be removing a leaf or 2 do drop the chassis to more stock height.
  5. mstang

    Lifted Fj40.

    Both I suppose, the vibration is shaking the hell out of the box, causing all sorts of gear chatter.
  6. mstang

    Lifted Fj40.

    Yep, shaft in phase and balanced. It's not engine rpm related, but road speed. I've read heaps of articles and the common theme is shaft angle. Most say around 7 degree. So that's my question, has anyone lifted a 40 and put a 5 speed in? What angle are all your driveshafts running at?
  7. mstang

    Lifted Fj40.

    There is no movement. There is still plenty of spline in the joint. The paint marks are at full compression.
  8. mstang

    Lifted Fj40.

    The transfer and third member both read 88.9. It was rebuilt after trying to diagnose the noise. Actually, everything has been rebuilt, diffs, brakes, swivel hubs. Everything.
  9. mstang

    Lifted Fj40.

    Temporarily removed. Had the gearbox in and out so many times, it was easier to do it without. Hasn't been. Driven since removing it.
  10. mstang

    Lifted Fj40.

    Bugger, tried doing this on my phone, two posts, one incomplete, one without pics. Can't seem to find the delete option. Flanges are spot on parallel. I have a digital angle finder.
  11. mstang

    Lifted Fj40.

    Flanges are spot on parallel.
  12. mstang

    Lifted Fj40.

    Hey all, I have a question for everyone that has lifted an Fj40. What did you do with your rear tailshaft. Especially is you have installed a 5 speed. I have a 1977 Fj40 that had a 2'' lift that I never paid any attention to, and installed a reconditioned H55f. Got new front and rear shafts...
  13. mstang

    289w fj40

    I changed the pan to a Bronco rear hump style, but still might be able to modify the front bit to get a bit more clearance there. I'll try turning the shroud upside down, only issue I could see is it'll be off center on the wrong side. I've ran an electric fan off this v8 in the mustang for...
  14. mstang

    289w fj40

    Yes, the bash plate is the skid plate. I think I've come to a happy medium, I'll modify the skid plate a little to get the clearance I need. The engine isn't quite horizontal, the front points up a little. And the fan is still about 2 inches below the bottom of the fan shroud. (Electric...
  15. mstang

    289w fj40

    grrr, damn computer. sorry for the double post. Last pic if from the top, showing how much the engine has been moved forward
Back
Top Bottom