Recent content by MrFitzie

I used that exact Amazon harness a few years ago and I don't remember exactly why but it didn't work right, maybe it was just the high beam indicator still not working. I did end up modifying the cheap harness to make a working harness as detailed here: Instructions for LED Headlight upgrade...

Ready to buy a a brown handle, watching thread

Interested in a few pieces, sent a PM, thanks!

The FJ60s have an inner and outer rubber boot for the transfer case shifter. There might be a difference between the early FJ60 and later FJ60s so double check, but SOR (Switch to the transfer case boots tab) has some images on their page and there are a couple of ads in classified with them as...

Would also love to get this in brown, my current handle looks like it was a dogs chew toy.

Interested in the FJ60 Shift Boot. Sending a PM

Do you have a good condition brown interior e-brake handle and passenger side front seat belt?

They have a thread in Vendor - Misc: NEW 60 Series Storage Options - https://forum.ih8mud.com/threads/new-60-series-storage-options.1295508/

Looks like the 99-02 5.3s (I have a 2000) have a simpler setup, no electronic fan to worry about and no pressure sensors, just the simple on/off pressure switches. Like yourself I ended up wiring in the GM PCM control because I wanted the idle up and proper handling of both high/low pressure...

I have the GM PCM controlling my AC but still use the modified Toyota AC Amp as part of the circuit. I have a 2000 Gen3 5.3 so the wiring is pretty simple, and this site has some great info on the AC setup and the signals expected: Upgrading to Gen III LS-Series PCM: Air Conditioning Guide, I...

I use the same CSF 2708 radiator with a custom shroud made from Summit Racing SUM-380479-SH shroud kit and the stock mechanical fan on my 00 5.3. Like @dbbowen mentioned you will need to piece together the hoses and run an inline steam port, I used this one off Amazon in 36mm, but anything...

Ditto!

Thanks for the reply, I had a feeling this has to be somewhat common and thought I had run across some threads about it but couldn't dig them up with search. Drilling out the spot welds to clean up both sides of the mount is a good idea. I had not heard of linseed oil before, thanks for the...

This weekend I started ripping out my old carpet to lay down some sound deadening and put in a new carpet kit, but when I removed the wheel well covers I noticed this. I decided to try grinding away some of the loose surface rust and it kept going. It looks like water came in from the...

Also interested in brackets + sway bar kit for the 60