I saw the one on eBay, nice looking but of course it's sold. I'm just in need of the leather but the only leather I find, does the whole wheel. Anyone know who might sell the leather shown in the below photo?
So what is the color spray for the dark color and who makes...anyone? I read somewhere to try SEM 15723 Color Coat but at $25.99, would like to hear from someone that might have tried it.
I would re-check all the bolts to make sure they are really tight. The two bolts that hold the band around the "D" bushing are difficult to get to but worth checking as well.
I went to Google and looked up Land Cruiser worn steering rack bushings. There is more than one video showing the same movement...which is unacceptable by the way. When I saw the same movement on my rack last year, I replaced the bushings with poly ones. It was a bear of a job...took the better...
There is always some play but that looks suspicious. Be interesting to see what is going on at the other end where the band bushing goes around the rack. Might be some movement going on there too.
Soft rack bushings can be seen when rocking the steering wheel with wheels on the ground. If the rack actually moves...not a great deal but just a little, it will cause the steering to wander. I ended up with replacing the rack bushings and most other things in the front end...control arms, etc.
Mike - I'm sure that you may have already tried this but thought I'd mention. Found my issues with the car parked in the driveway and with the engine running, having someone turn (rock) the steering wheel back and forth slightly about an inch in either direction while I watched from underneath...
So, if I'm understanding this...I can buy this mini VCI J2534 cable and hook it up to my laptop, install the software that comes with the connector...or download it and I have a great diagnostic tester for my Toyota Land Cruiser?
Not yet! Trying to get smarter from other's experiences. So far, have not found any information from anyone that has had close to the same or similar issue experience. Lots of actual failures and pump and accumulator performance issues but none identical so the search continues.
Symptoms are: all the warning lights are on, no alarms, brakes function normally. Checked all ABS wheel sensors, AUTEL OBD2 says it is unable to establish communication with ECU. Been driving the car since December 2020 and except for the warning lights, everything seems normal. It's just...