Recent content by McBain

I have this EXACT noise on my 2015 LX @ 86K miles. Check your oil level …

For clarification, the Camry injectors had the lower flow rate. I also went ahead and had the “new ones” cleaned and installed them as a test. Honestly, I noticed a significant increase in power although it may be attributable to the clean injectors versus the different specs. Either way, I...

This is my first post so before I begin .... a big thanks to the community for all the help and resources over the past year on my build. I have a 01/1988 FJ62 I received from the original owner (my father). I rode around in this truck as a kid and have a lot of fond memories on family road...

would the fuel rail still be available? Part 23807‑61010.

Congrats!!!!!!

Hopefully you got this figured out!!!! Let us know because it helps everyone else who runs into problems ....

One other thought ... did you set the timing with the TE1 and E1 terminals shorted on the diagnostic port? And what is your idle when the engine is cold and the A/C is off? How long does it take for the idle to drop to 650rpm?

I can check tonight on my rig but it should be the very lower left 15A fuse.

I would seriously consider checking the fuel pressure at the filter and the cold start injector with a gauge. It should be around 35psi to 40psi if i remember correctly. At least you can rule out delivery to the rail as an issue. You can still get pressure and then fuel out if the return line...

I ran into this issue and it turned out to be several things for me. Definitely check the fuel pressure at the CSI and again at the fuel filter to make sure it is in spec to the FSM - it will run with crappy fuel pressure but get no power when you step on the gas (I realize you replaced the...