Recent content by man2112

  1. M

    FJ60 / 62 series A pillar gauge cluster

    Sorry to revive a dead thread, but did anyone ever end up solving the dual pod A pillar problem? The generic 2 pod pillar from glowshift leaves a lot to be desired
  2. M

    Headlights come on every time the ignition is on regardless of headlight switch position

    After taking apart the steering wheel and the dimmer switch, this is what I’ve found. With the high/low selector in the neautral (low beam) position, ground and low beam are connected regardless of the position that light on / off knob is in. To me this seems like it’s incorrect, but now I’m...
  3. M

    Headlights come on every time the ignition is on regardless of headlight switch position

    Hey all. So I added some relays to my headlight circuit in order to use LED headlights instead of incandescent. Attached is a diagram of how I have them wired. The headlights high / low beams work just fine this way, however the low beams come on any time the key is turned to on, regardless...
  4. M

    Glow plug current and water temp sensor compatibility / replacement parts for SuperGlow.

    Yeah, I’ve reached out to them but haven’t received any answer.
  5. M

    Glow plug current and water temp sensor compatibility / replacement parts for SuperGlow.

    Thanks. I wonder if the regular 1 wire FJ60 style water temp sensor will work instead?
  6. M

    Glow plug current and water temp sensor compatibility / replacement parts for SuperGlow.

    Yes, becasue I want the superglow feature, timer, etc. I know a wilson switch would work, but I have that already.
  7. M

    Glow plug current and water temp sensor compatibility / replacement parts for SuperGlow.

    Hey all, I'm currently wiring up a super glow system in to by Isuzu 4BD2T swapped FJ60. I purchased a timer board from "ReviveYourRig" out of Australia, and am wiring it up via their manual. I've noticed that the toyota part for the glow current sensor on the 2H is a 28631-68020 and the water...
  8. M

    Correct part number for 12v inclinometer?

    How do all the guys in Australia and the middle east get them then?
  9. M

    Correct part number for 12v inclinometer?

    Amayama shows several of them available, I'm waiting for a stock check on them now.
  10. M

    Correct part number for 12v inclinometer?

    Do you happen to know the part number for that one?
  11. M

    Converting Isuzu 4BD2TC tach signal to either FJ60 or BJ60 tach signal

    Got a new alternator today, but it is still only giving a 0.3v signal on the stator winding. Any guys smart with alternators know how to fix this? I tried a small opamp, but that added way too much noise.
  12. M

    Correct part number for 12v inclinometer?

    I'm seeing either: 83910-90A01 83910-90A02 83910-90A08 Anyone know which one is correct? and of those, which one is still available in japan? Amayama says the A02 is out of production, but I can't find a picture of the A01 or the A08 to confirm that either does or doesn't have the inclinometer...
  13. M

    Converting Isuzu 4BD2TC tach signal to either FJ60 or BJ60 tach signal

    Anyone have any ideas on a solution please?
Back
Top Bottom