Recent content by LXMUTT

5 years ago I had a apps code pop up and some weird symptoms pop up(not like yours). Per recommendations I replaced the entire throttle body with a new oem one. Fast forward a few years I started getting different symptoms (same as yours). Like you I started to replace other parts thinking they...

You were right, I went through every speaker today and sure enough the subwoofer was bad. Now the sound works great with it unplugged. I’ll buy a new subwoofer speaker and get everything back up and running. Thanks!

Hey All, Been a while since I’ve posted. I’ve got a 2002 lx470 with Nav that has been having sound issues It first stared 5 years ago when the music would cut out during a song. Then it got quieter and quieter to the point of not working at all. When I first started researching it then everyone...

Fixed a small coolant leak, and replaced the starter while I was in there. Up next, rear pinion seal.

Hey all, I recently noticed a leak at the rear pinion seal. I checked my diff breather and it seemed to be fine and clear. Ive also added some AT 205 with no change. It seems like its not common to have this leak so theres not too much info on replacing it in the forums. From what I've read...

Here are some pictures of my vault kit. Very high quality WIY kit and excellent customer service!

I'll make sure to rotate my tire for frequently, and check the Upper and Lower control arm bushings. My LX has 221,000 miles on it so its a good bet that those could be going out. I guess in my opinion I'm not going fast around corners, but I don't go slow either... seems like my alignment is...

The last two times have been 7k and 8k between rotations. I put around 30k last year.

Hello all, I've been getting some uneven tire wear on all 4 tires. They are cupping on both inside and outside edges, as shown in the pictures. I have a 1.5" Medium OME lift (installed last spring) , 32" ko2's(60,000 miles on them,) and alignment in spec. Could this be something with the...

Ever thought about making something for this space in the center console? its where the disk changer used to be.

Did you ever get this figured out? This exact thing happened to me today..

Have you noticed any cupping with those st maxx tires? I had the st maxx on my last car and by the time I hit 30-40k they were terribly cupped and had a ton of road noise. That was with proper inflation, rotation every 5k, and correct alignment. If it wasn't for the cupping I'd probably put them...

I'm currently working on a 80 with this exact thing. On this 80 the hum is high pitch and is almost a whistle when the gas pedal is applied. I am having a hard time pin pointing it because when I turn my head to listen for it, the sound changes. The exhaust tip was broken off and was replaced...

Put 20 hours of work in the land cruisers over the weekend.

So just to update this I added a new MAF last week while waiting for some new hoses, PCV valve, and rubber grommet. These to readings are with new MAF and reset computer. It was fluctuating between the two. Then today I added new hoses, PCV, and grommet and reset the computer. This is what...