Recent content by lunchbox 2

  1. L

    Mirror Control Unit Replacement

    For those of you with the same problem on a 2003, here is some helpful info: your mirror ECU receives 12v switched through the ACC 7.5A fuse on the drivers side footwell, and 12V constant through the ECU-B2 fuse in the box in the passenger footwell. If you take off the door card you can unclip...
  2. L

    Mirror Control Unit Replacement

    Update - you have to pair the mirror ECU with the car using techstream if you have the control panel on the drivers door for driver seat position memory. My mirror ECU is not getting power at the moment, will update this when I keep troubleshooting in the hope it may help someone else down the...
  3. L

    where did you mount the base unit for remote head HAM radio?

    I'm attempting to do this now. On the driver's side, the subwoofer takes up a lot of room. I removed the bracket for the jack and the radio body will fit in there. I think the cargo area has the possibility for the cleanest install, so for anyone who has done that - would you mind sharing a...
  4. L

    Mirror Control Unit Replacement

    Symptom: Side view mirrors will retract but will not adjust. No motor noise when attempting to adjust mirrors. There's a post on here suggesting that fixing this problem requires replacing the mirror control unit in the drivers side door. I have a replacement unit I sourced from eBay, but...
  5. L

    Window Switch Panel Will Not Reseat After Removal

    Update - bent the clip so that it is now vertical, same result. It doesn’t look like it’s hitting anything below. Has anyone fixed this by bending the clip forward rather than vertically? The metal piece that anchors the clip on the door panel doesn’t seem to be warped to me.
  6. L

    Window Switch Panel Will Not Reseat After Removal

    Thanks for the ideas guys. I'll get back out there tonight and see if I can't look at the vinyl, and have noticed in some of the other pictures of the locking clip the clip seems to be oriented exactly vertical - I may have to put it in the vise and straighten mine out.
  7. L

    Window Switch Panel Will Not Reseat After Removal

    After removing the door panel to refoam the speaker the passenger side switch panel will not sit flat. Nothing was broken during removal...and it clips in but sort of sits a few mm up off the leather. Any ideas what the issue is? Here is how it is sitting "clipped in" Here are some shots...
Back
Top Bottom